Grundle Jeep

[wannabejeep]

will do, my plan is to run a double captured coil in the rear, and try to run a bump stop in there too

I saw this once... Not sure if it's similar to what you're talking about

[Even]

I saw this once... Not sure if it's similar to what you're talking about

That looks like it's captured at the bottom, and just has a landing pad for it on top.

I think Dana is talking about clamping the coil from the top and bottom, almost like the coil is it's own limit strap. I could be wrong though.

[grundlepunch]

That looks like it's captured at the bottom, and just has a landing pad for it on top.

I think Dana is talking about clamping the coil from the top and bottom, almost like the coil is it's own limit strap. I could be wrong though.

[Ktmracer419]

[SupermanIce-J]

LOOKIN SAWEET Dana!

[grundlepunch]

LOOKIN SAWEET Dana!

Thanks buddy!!!

[grundlepunch]

got my frame all set today, ran outa gas though. Thanks Andy for letting me borrow your bottle

I hope this is strong enough



got my shit in from ruff stuff should be a busy day tomorrow

also, was measuring stuff up today, going to have 3.25" from the rear of my tire to the end of the bumper.... killer departure angle

[clean4drxj]

nice weld job!

[OWEN]

will do, my plan is to run a double captured coil in the rear, and try to run a bump stop in there too

Take a look at my build, I was going to do double captured, but I went captured on the bottom and "semi-captured" on the top... The coil can drop about 3" on the isolator but is retained... and there is a bumpstop.

[OWEN]

http://sisoffroad.com/forums/showthr...p?t=515&page=2

[grundlepunch]

looks like what i want to do, not 100% if im going to have that tube in there or not

[Ktmracer419]

i can't wait to wheel with this thing

[ninetysix-ex-jay]

Damn man things looking sweet

[OWEN]

looks like what i want to do, not 100% if im going to have that tube in there or not

FLexed
Works well for me, only issue is the bumpstops are a little on the harsh side when I land from a launch. Oh and don't mount your shocks like you see in the picture

[HeavyMetal]

wow, those are incredibly in-board