yea i know how that goes, i might try and finish mine up tomorrow morning, ill see how it goes before some side jobs i gotta do.
Announcement
Collapse
No announcement yet.
Netrachamp1853's builds
Collapse
X
-
So I starting messing around with my front bumper today since I had the day off, and before I knew it I had most of the bumper cut off and was bending up some new tube.
I cut everything off and made the bottom peice first. Just two 40 degree bends at each side
The bull bar before it was cut down to length
Tacked up
Heres one of the support peices for the bull bar, I think it was like a 20 degree bend and some deep notches.
Sorry for the super shitty quality of this last pic, here it is before I paint it tomorrow and put the winch back on.
98 Cherokee, D30/8.25 w/4.56s locked F/R -- 3 link front IRO springs rear with shackle relocation, one ton steering w/heims, hybrid cage under contruction, 33'' KM2's
Comment
-
Thanks, yea i had no idea what i really wanted when i started but thats how it ended up, it wasnt to hard to make..The hardest parts are the little supports for the bull bar, I may start offering them.98 Cherokee, D30/8.25 w/4.56s locked F/R -- 3 link front IRO springs rear with shackle relocation, one ton steering w/heims, hybrid cage under contruction, 33'' KM2's
Comment
Comment