Announcement

Collapse
No announcement yet.

Project "Pocket Change"

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #76
    Hokay so i have decided that this motor is going to get a hi volume earl pump this week and im not going to swap it. Hopefully it holds up for a bit if not its getting an H.O
    89XJ Pioneer Edition 3.5" 33s ravines 4:10s 8.8- parted but not forgotten
    95XJ tons 3 link 36s 5:38s
    97 F-250HD 7.3 Turbo Diesel
    If Parts Ain't Flyin' you Ain't Tryin'

    "Shut up and Wheel"

    Comment


    • #77
      Pump is in and making good pressure However the renix is runnig EXTREMELY rich so i need to figure that out for sure. Exhaust just needs a hanger or two but is other wise good to go. Hubs are in axles are lubed brakes are all on just waiting on banjo bolts and Ill be able to stop this thing on its own. MAKING PROGRESS!! Test Run June 24th
      89XJ Pioneer Edition 3.5" 33s ravines 4:10s 8.8- parted but not forgotten
      95XJ tons 3 link 36s 5:38s
      97 F-250HD 7.3 Turbo Diesel
      If Parts Ain't Flyin' you Ain't Tryin'

      "Shut up and Wheel"

      Comment


      • #78
        coolant temp sensor?
        1993 XJ sport 3.5" rustys 33" MTZ's armored.
        1999 sierra
        1967 M725 Big and Slow
        -Dan

        Comment


        • #79
          Originally posted by wannabejeep View Post
          coolant temp sensor?
          I was thinkin this or map sensor
          89XJ Pioneer Edition 3.5" 33s ravines 4:10s 8.8- parted but not forgotten
          95XJ tons 3 link 36s 5:38s
          97 F-250HD 7.3 Turbo Diesel
          If Parts Ain't Flyin' you Ain't Tryin'

          "Shut up and Wheel"

          Comment


          • #80
            We got brakes! HOLY SHIT does this thing stop like a monster damn near sent myself through the windsheild... I guess dual piston calipers and 14" rotors on all 4 corners will do that
            89XJ Pioneer Edition 3.5" 33s ravines 4:10s 8.8- parted but not forgotten
            95XJ tons 3 link 36s 5:38s
            97 F-250HD 7.3 Turbo Diesel
            If Parts Ain't Flyin' you Ain't Tryin'

            "Shut up and Wheel"

            Comment


            • #81
              pics of this thing together
              I drive a Datsun

              Comment


              • #82
                Pics of some progress Ill take some better ones today


                Got the truck over to my buddy mikes shop where I have acess to thousands of dollars of awsome tools whenever I need Thanks Buddy!


                New Rear Bumper for the cost of $0 dollars thanks to a friend that gave me his XJ to scrap and left this on it


                New Alternator and also located the charging problem didnt have the key power wire hooked up :banghead:


                Today I will be fixing one of the biggest issues I currently have


                When I did the oil pump I failed to put the oil pan gasket in the rear grove of the block and it now allows oil to piss out everywhere when its running... So im going to reseal that today.

                Im still waiting on my Shock tabs from Ruff Stuff hoping to see them today or tommorow.

                Ill update this later when the pan is resealed
                89XJ Pioneer Edition 3.5" 33s ravines 4:10s 8.8- parted but not forgotten
                95XJ tons 3 link 36s 5:38s
                97 F-250HD 7.3 Turbo Diesel
                If Parts Ain't Flyin' you Ain't Tryin'

                "Shut up and Wheel"

                Comment


                • #83
                  does that challenger still collect dust? haha

                  gonna be all set for OER?
                  - Will


                  Originally posted by fizzy
                  or am asians pants not a read end lol.
                  Originally posted by DizzDizz
                  aliens probed my husband

                  Comment


                  • #84
                    Originally posted by HeavyMetal View Post
                    does that challenger still collect dust? haha

                    gonna be all set for OER?

                    Challenger gets a road beating from time to time its got like half tread on the rear tires and not even 1000 miles on it


                    It should be mint for OER it will be at NAC fest in a week and a half
                    89XJ Pioneer Edition 3.5" 33s ravines 4:10s 8.8- parted but not forgotten
                    95XJ tons 3 link 36s 5:38s
                    97 F-250HD 7.3 Turbo Diesel
                    If Parts Ain't Flyin' you Ain't Tryin'

                    "Shut up and Wheel"

                    Comment


                    • #85
                      Originally posted by WAD357 View Post
                      Challenger gets a road beating from time to time its got like half tread on the rear tires and not even 1000 miles on it


                      It should be mint for OER it will be at NAC fest in a week and a half
                      to all.

                      i still want the challenger.
                      - Will


                      Originally posted by fizzy
                      or am asians pants not a read end lol.
                      Originally posted by DizzDizz
                      aliens probed my husband

                      Comment


                      • #86
                        Originally posted by HeavyMetal View Post
                        to all.

                        i still want the challenger.
                        I just want to drive it but im not allowed Im lucky he lets me back the megacab out of the garage to work on my XJ
                        89XJ Pioneer Edition 3.5" 33s ravines 4:10s 8.8- parted but not forgotten
                        95XJ tons 3 link 36s 5:38s
                        97 F-250HD 7.3 Turbo Diesel
                        If Parts Ain't Flyin' you Ain't Tryin'

                        "Shut up and Wheel"

                        Comment


                        • #87
                          Made some good progress today

                          Started with fixing the MEGA oil leak


                          Heres the cause...


                          the gasket actualy seems to big to seal so we cut a section out and siliconed the rest of it... Seems to be holding well

                          Also located the reason it was running so rough... I had the map sensor vaccum line in the wrong port on the TB, Runs much smoother now!

                          Also realised I have some steering contact with my track bar bracket so that will need some trimming


                          Also have to decide how to trim the rear quarters more



                          Couple other random pics

                          Fairly flat leafs bastard packed with old YJ front leafs



                          Dual piston awesomeness




                          Approach angle should be decent, Gotta mount my bumper which sits flush with the header panel


                          89XJ Pioneer Edition 3.5" 33s ravines 4:10s 8.8- parted but not forgotten
                          95XJ tons 3 link 36s 5:38s
                          97 F-250HD 7.3 Turbo Diesel
                          If Parts Ain't Flyin' you Ain't Tryin'

                          "Shut up and Wheel"

                          Comment


                          • #88

                            Comment


                            • #89
                              Aquired these today at a very very nice price 10" travel King Resi shocks
                              89XJ Pioneer Edition 3.5" 33s ravines 4:10s 8.8- parted but not forgotten
                              95XJ tons 3 link 36s 5:38s
                              97 F-250HD 7.3 Turbo Diesel
                              If Parts Ain't Flyin' you Ain't Tryin'

                              "Shut up and Wheel"

                              Comment


                              • #90

                                Comment

                                Working...
                                X