Tweet
Me and a few friends were BSing in shop and this axle came up, does it have a place in the 4x4 community and would it be a good jeep axle?
-
OER The bad judgment Olympics.
Lowlife 35x12.5s on 3 inches of lift.
General Tires are
-
Some people use the semi-float 14's. Its not bad, but full float versions can be had just as cheap. The housing is smaller, which is nice, but so is everything else.Dan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.com -
Yar, drop anchor, yar.
Sent from my pay phone in Chechnya2000 XJ: "The Black Jeep"MK2 Jetta > M3Chairman of the Chechnyan Space ProgramComment
-
I see well I was just wondering your guys thoughts, I brought it up because he was stoked about going from a 10 bolt to a SF 14BOER The bad judgment Olympics.
Lowlife 35x12.5s on 3 inches of lift.
General Tires areComment
-
If he has a 10 bolt now, anything is an improvement. Chevy's version of the D35...
Sent from my pay phone in Chechnya2000 XJ: "The Black Jeep"MK2 Jetta > M3Chairman of the Chechnyan Space ProgramComment
-
I got that, it sucks alot!OER The bad judgment Olympics.
Lowlife 35x12.5s on 3 inches of lift.
General Tires areComment
-
Dan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.comComment
-
Doesnt seem to bad It actually looks like a good axle for a mild jeep with a waggy front axleOER The bad judgment Olympics.
Lowlife 35x12.5s on 3 inches of lift.
General Tires areComment
-
It is. They are pretty stout. Probably comparable to a 60.Originally posted by Luke95 View PostDan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.comComment
-
Well then, any thought on how to get it adapted to U bolts?OER The bad judgment Olympics.
Lowlife 35x12.5s on 3 inches of lift.
General Tires areComment
-
with u bolts? depending on application move the perches? possibly need u bolt plates?
your sense makes zero question.Last edited by justtorchit; 12-19-2012, 03:46 PM.Originally posted by Ktmracer419Comment
-
I meant to secure the U joing it uses straps I beilive and If I followed pirates thread its a weak pointOER The bad judgment Olympics.
Lowlife 35x12.5s on 3 inches of lift.
General Tires areComment
-
idk if they make diffrent yokes for the sf, but with my ff i just got a new u bolt style yoke.
i wouldnt worry to much about them.
what is the application for this axle?Last edited by justtorchit; 12-19-2012, 04:29 PM.Originally posted by Ktmracer419Comment
-
Usually 3/4 ton Chevy trucks and vans.Originally posted by justtorchit View Post
It would probably be too wide to run with a Waggy 44 front. 8.8 is probably a better match strength/size wise, but the different bolt patterns present an issue.
You could buy Zach's (Lycaon) Isuzu rear in the for sale section with a Waggy front. That was my plan originally.97 XJ.Comment
-
yeh i meant what is this going in....Originally posted by Harry View Post
what front axle....
i thought the 14 bolt sf were 8 lug?
edit: guess they came 6 lug too.Originally posted by Ktmracer419Comment
Comment