What exactly are you doing for a lift? Springs I assume. If thats the case, your driveshafts will be fine. If you should get any vibration, add degree shims between the axle and the spring to kick the pinion up to match the output of transfercase. You may or may not need to lower the transfercase an inch. If needed, grab a piece of 1" square tubing, drill 3 bolt holes and attach it between your frame and your skid plate. You may also need a dropped pitman arm.
you shouldn't need a pitman, or a t case drop. Just buy a kit, most will have everything you need in it.
Originally posted by Fast Orange
if you piss all over the floor and get 3 drops in the bowl do you count that as good? granted i'm good for a sprinkle or two on the seat, but you leave all of our feet wet, metaphorically speaking of course
Originally posted by HitItWithSomeSpeed
I find adam sandler strangely attractive, it must be josh's fault. god that kid sucks
Comment