Tweet
If i put a 2 " lift on my 95 YJ will i need a new drive shaft front or rear im not sure or anything else
-
95 Yj 4.0, Flowmaster 40 series exhaust, Blue Hids and Yellow Fog Lights, K&N air filter, 2" Boomarang shackles, and sway bar and track bar removal.
-
What exactly are you doing for a lift? Springs I assume. If thats the case, your driveshafts will be fine. If you should get any vibration, add degree shims between the axle and the spring to kick the pinion up to match the output of transfercase. You may or may not need to lower the transfercase an inch. If needed, grab a piece of 1" square tubing, drill 3 bolt holes and attach it between your frame and your skid plate. You may also need a dropped pitman arm.88 YJ...kinda. Clayton Hard Arms, V8, 1 tons w/Detroits, twin sticked T-18/NP205, Irok's, MasterCrafts, fuel cell, multi-colored -
you shouldn't need a pitman, or a t case drop. Just buy a kit, most will have everything you need in it.Originally posted by Fast OrangeOriginally posted by HitItWithSomeSpeedComment
-
So i shouldnt really worry bout it?Originally posted by ruecifur View Post95 Yj 4.0, Flowmaster 40 series exhaust, Blue Hids and Yellow Fog Lights, K&N air filter, 2" Boomarang shackles, and sway bar and track bar removal.Comment
-
if i remember 2" for a yj is just springs and shocks. you can relocated the brake lines and be good
while your doing that take off your sway bar and track bars. they are not needed for a sprung under yj"when I'm riding my motorcycle,I'm glad to be alive...when I stop riding my motorcycle,I'm glad to be alive"Comment
-
Wont it sway allove the place thoughOriginally posted by grundlepunch View Postif i remember 2" for a yj is just springs and shocks. you can relocated the brake lines and be good
while your doing that take off your sway bar and track bars. they are not needed for a sprung under yj95 Yj 4.0, Flowmaster 40 series exhaust, Blue Hids and Yellow Fog Lights, K&N air filter, 2" Boomarang shackles, and sway bar and track bar removal.Comment
Comment