God Damn dude, that is amazing.
Announcement
Collapse
No announcement yet.
My 1950 Willys Trail Rig
Collapse
X
-
Finally got my stuff from Ballistic Fab...the tube adapters for the uppers were too big so I am having my friend turn them down for my on his lathe. Everything else looks good. I formatted my laptop and have it setup with Microsoft Office 07 and the 4 link calculator. I had a good design before it crashed so I'll have to do it again, I have a rough copy on paper. I have my hands full with the truck right now, but hopefully it will be back together by next weekend, and I can finish my jeep while the truck is getting painted1950 Willys Trail Rig
2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4
Comment
-
Originally posted by JoeNitro View Postdude i wish i had the ability to do shit like that. you got yourself some nasty fabrication skills there my friend.1950 Willys Trail Rig
2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4
Comment
-
Haven't touched it in a while, but I will be soon. In the mean time here are some parts (yay). 2.63 Ballistic forged chromolly ends with square tube adapters. That is a 12oz beer can for scale
1950 Willys Trail Rig
2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4
Comment
-
Originally posted by crosbike View Postunless he makes really big arms
I decided it was time to get some shit done, while waiting for paint to dry on my other project... so here we go
Start
I bought a new computer to run the 4 link analizer plus I needed one anyway and I don't think my girlfriend would let me bring hers to my shop.
I painted frame white so I can write with a Sharpie.
I used a plumbob to mark the old axle location relative to the frame and measured to a few refereneces as well
Next remove all of the old leaf spring shiz
1950 Willys Trail Rig
2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4
Comment
Comment