Anyone interested in tube doors?

[netrachamp1853]

Alright, well im gonna get crackin on at least one 4-door and one 2-door set and not put hinges on them till I know what people want.

[rweaver138]

do you plan on doing all four doors? if so what kind of price would we be looking at for a set of 97+ four door?

[netrachamp1853]

Funny you say that..5 mins ago my dad says "hey you should make a set for the back doors now" Um I will make a rear set its just a matter of time. My tube is delayed till tuesday at the moment because of the holiday. So I plan to have at least 2 sets done by the end of next week. (front doors only), as far as a set for all 4 doors..prob right around $300..That may shift very slightly..depends if I stay with my super super simple latch or go with somthing that will acually open with a lever..But as long as people dont mind the simple hitch pin latch I can keep these doors pretty cheap! I'll prob have a 4-door set mocked up on my own ride in 2 weeks or less. Then I can refine it and make you a set if you want them.

[Ruepart Hoaxley]

I'd be down for a 4-door set sometime before OER.

[rweaver138]

id rock all four.. not a bad price either

[netrachamp1853]

Alright, guess I'll have to get more lengths of tube...haha, I'll have a rear set mocked up on mine by the end of next week. And I should deff have no prob making 2 4-door sets before OER.

[WickedXJ]

I'd like a set for my 93 2-dr. I pick em as soon as you can have them ready.

[netrachamp1853]

Alright sounds good, They should have all my tube at Logans tuesday..So if that stays on schedule thats when Im gonna start making them.

[netrachamp1853]

Alright I just wanted to get some more pics up of these things so you know what your getting. Please keep in mind the pics are of PROTOTYPE doors, the finished product will be alot cleaner, all the edges will be finished etc etc etc.

Heres a pic of the latch, the new doors the latch peice off the door will be bigger and have a vertical gusset.



Here the hinge, like I said the finished product will have rounded edges, and cleaner welding, and a vertical gusset, also you can see the mirror mounts.

[netrachamp1853]

Also you can see the first vertical peice of the door is square, its square because thats all I had at the time, I can keep it square, or use round tube in place if it. Its up to you guys.

[netrachamp1853]

It would prob be easier for my to keep it square, also I can keep the doors cheaper. But let me know I can cater to whatever

[Trailer Ray]

I would be interested in a set for my 96 4 door.

[netrachamp1853]

Alright, the hardest part will be mocking up the doors since i dont have a 96 or older 4-door to do it. The overall dimensions should pretty much be the same, so I could just make the doors and have you come down and I'll weld the hinges on right there. Prob gonna be around 300 bucks. Depends if your doors are aleady set up to go doorless or would I need to make them bolt up to the normal door hinges.

[netrachamp1853]

A little update, my steel at logans got delayed due to the holiday..and the bender at my dads shop isnt made for thick walled steel..SOOOOooooOOOoo..Tube will be here by thursday or friday..and so will a new tube bender

[rweaver138]

do the doors rattle at all when you go over bumps? like near the hinges and such. and also what price would we be looking at for round tube? i like the look of the round tube better but if its too pricey i can settle with square.