Other interests: Car guys come on in

[DrThunder]

Fucking bad ass!

Thank you for not only owning a muscle car, but owning a muscle car that runs better than a 14.5 in the 1/4. I would say a good 95% of those things look and sound amazing, and then run like a turd. Chevelles are by far one of my all time favorites.

And I love my T56. I have about $2400 into it in parts alone, so hopefully I don't break it anytime soon. It's got the HD viper input and main shafts, along with all the other upgraded internal parts. It's been holding 600+ HP so far lol. Can't wait to get to the track this coming season and see what my car does. Hoping for a low 11 to high 10 at 130+ mph. Guess we'll find out in a few months.

My pleasure! haha I know what you mean how 95% are turds. They make a bad name for the "muscle car." I was looking into doing the same things you have done to the tranny and possibly into even faceplating. It was just cheaper when I blew mine up to spend $400 on a transmission that is already strong enough. Sounds like your car would easily run high tens if you can hook even a little bit. I'd be curious how many mph you'll get out of it. I try to get up to epping at least once a month with a few friends. Maybe we can set up a day. Always more fun with people you know!

[rckymntn05]

I'm definitely down for a track day. I'm already planning a road trip in early May to do a 6 hour drive to Buffalo, NY and meet up with a group of 3rd gen F-body owners. Probably make a weekend trip out of it. I built my car to drive, so I can't wait to start racking up the miles on it!

[WTNFDYJ]

this is my buddy's viggen. built motor running a gtx30r

mine is in the process of getting a HX35 it has a built motor should be appx 450 whp when its complete.. he has john tune it and his 2nd gear went buhbye right?? i was trying to make it to jersey for the tuning session they had

[rckymntn05]

mine is in the process of getting a HX35 it has a built motor should be appx 450 whp when its complete.. he has john tune it and his 2nd gear went buhbye right?? i was trying to make it to jersey for the tuning session they had

Damn, 450 whp out of a 4 cylinder!? Thats gotta be on like 25-30 PSI haha.

[WTNFDYJ]

Damn, 450 whp out of a 4 cylinder!? Thats gotta be on like 25-30 PSI haha.

your in the ball park, the tuner said with a holset and 27 PSI ill be seeing those numbers. i was running 18psi and did 315 whp with a smaller turbo set up that i just sold.

[Henchman]

Damn, 450 whp out of a 4 cylinder!? Thats gotta be on like 25-30 PSI haha.

I love screaming 4cyl turbos. I've seen a 916whp integra on a dyno. 'twas ridiculous

[rckymntn05]

your in the ball park, the tuner said with a holset and 27 PSI ill be seeing those numbers. i was running 18psi and did 315 whp with a smaller turbo set up that i just sold.

Well good luck. Things gonna CRANK if you make anywhere around that number!

[00grntj]

2007 SeaDoo RXP 215 Supercharged, all torn apart for the winter getting some much needed upgrades! Should be in the 300ish horsepower range and 80+mph

[rckymntn05]

2007 SeaDoo RXP 215 Supercharged, all torn apart for the winter getting some much needed upgrades! Should be in the 300ish horsepower range and 80+mph

LMAO, pretty sure I saw a vid where they raced one of those against a corvette that was on land beside the lake, and it beat it 0-60. Thats insane dude, having that much HP in a freaking jet ski!!

[00grntj]

<iframe width="853" height="480" src="https://www.youtube.com/embed/_bZ6H08-tpY" frameborder="0" allowfullscreen></iframe>

I'll most likely be using the charger housing they put in the X model skis (shown above) with a larger et137 supercharger wheel and some 48 pound injectors.

[clean4drxj]

Not a car obviously but not really a wheeler or jeep either!


The gay rollbar never stayed in the back but was rather put there because of limited room in the garage
Specs: 76 9" bigbearing rear/hp 44 front, Fresh 84 302 worked heads,cloyes timing chain&gears, comp cams cam(mild-medium lift/duration),edelbrock intake/car, 76 bronco full length headers, 9.5:1 comp. C4 stock tq with an aggressive shift kit. 4 inches of spring lift with a 1 inch body lift to clear a bronco 2 tank tucked up into the frame rails.

[WTNFDYJ]

Well good luck. Things gonna CRANK if you make anywhere around that number!

[ame]http://www.youtube.com/watch?v=bRNS1x4dknY[/ame]
[ame]http://www.youtube.com/watch?v=h34x69F4Xz0[/ame]

its will be OK the motors been balanced and has new JE forged internals it can handle the powered

[rckymntn05]

its will be OK the motors been balanced and has new JE forged internals it can handle the powered

Man, that dyno chart looked terrible lol. The line looked like an EKG graph. Tune definitely needs work!! And BTW, that saab made 415 WHP at 32 PSI. Man, thats a lot of boost for that HP. Seems like it'd be a time bomb in a street car!

I love speedo vids though. This is one I had of my TA. The vid was back when I was only running 6 PSI, and it made 402 RWHP at that boost. Need to make another vid now that I'm at 11 PSI, and over 500 rwhp.

[ame]http://www.youtube.com/watch?v=F5mZaOBKurQ[/ame]