Announcement

Collapse
No announcement yet.

Fender trimming

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    I can get front pacer flexy flares at 4.5" wide for 52$...Mom Most likely will not like there being no flares.

    What does "DANA 30 Reverse" mean compared to "DANA 30 Standard"
    And what is a carriar...what does it do, how do you know if you need a new one when regearing.

    Comment


    • #32
      Quess im going to be cuten them fenders sooner then i thought. Just got into a fight with a 2000 Ranger but my 2000 cherokee got the best of him. Cop talked to the witness after he said we could leave, but the witness was my friend and my dad stayed to hear what was said...If we talked to him first maybe me being at falt would be the other way!!! Btu officer already wrote it down and the other guy took off...o well

      Only damage was to what i was going to cut off

      BTW how do you post pics

      Comment


      • #33
        the low pinion dana 30 (2000-2001 cherokee) uses standard cut gears. all the high pinion dana 30's run reverse cut. the carrier needs to be changed in the front axle when going lower than 3.73 gears. since you are most likely going to 4.56 you need a new open carrier. depending on which rear axle you have you might need that too
        I drive a Datsun

        Comment


        • #34
          make urself a photobucket account, upload the pics to there and then use one of the links under the picture. (i think it's the embed one)
          God made the world in seven days, on the 7th day, he made the Le Car

          Real Jeeps have Unibodys

          Comment


          • #35


            Damage from incident..plan to cut most of it off anyway..justifies cuting a clean jeep up pullen the fender off it was just floppen around ....how do you get off teh thing that hold the flares on?

            ms/zz106/Cherokee-at-16/IMG_2848.jpg[/IMG]
            Last edited by cherokee-at-16; 12-19-2009, 09:53 PM.

            Comment


            • #36
              please go make an introduction
              1996 xj, waggy 44 front 5.13 gears aussie trussed, 3 links, 3.5" coils, spooled 8.8 rear, 38" tsl sx's, tnt front bumper, jesus freaks rear bumper, Olympic top hat roof rack, bunch of dumb shit
              2001 wj tbd
              1974 5 ton

              Comment


              • #37
                ? Whats that...i will do that but dont know what it is?

                Comment


                • #38
                  newbie forum.
                  94 xj 4.0L, AW4, 242
                  3" rusty's lift, 33x12.5 bfg km2's, custom front bumper

                  Comment


                  • #39
                    Go there and do what? Ill go check it out................done
                    Last edited by cherokee-at-16; 12-19-2009, 11:08 PM.

                    Comment


                    • #40
                      That will cut right out. no worries.
                      -Caleb

                      Crawl Daddy Champion 2011

                      1999 XJ 4 inchs of lift or so, 35s and some other stuff.

                      Comment


                      • #41
                        Any one know what axles bolt up to the cherokee

                        Comment


                        • #42
                          have fun.

                          http://sisoffroad.com/forums/showthread.php?t=11
                          #becauseJoeNitro

                          Comment


                          • #43
                            Originally posted by cherokee-at-16 View Post
                            Any one know what axles bolt up to the cherokee
                            A LJ or TJ dana 44 for the front, or any dana 30 out of a zj, xj, mj, lj, tj and for the rear a xj dana 44, a xj dana 35, or a 8.25. the dana 44s are the two strongest that will just bolt in but expect to pay alot of money for a tj or lj 44 front, and be prepared to do onboard air if you want to use the factory selectable locker..... also these have the same bolt pattern as eachother, if your looking for axles to swap in the ford 8.8 requires some work but will have the 5 on 4.5 bolt pattern and possibly disk brakes.

                            Also there are some other axles that can be made to bolt in relativly easily

                            Comment


                            • #44
                              Originally posted by cherokee-at-16 View Post
                              Any one know what axles bolt up to the cherokee
                              cherokee fronts, cherokee rears
                              tj wrangler fronts
                              zj grand cherokee fronts
                              www.eatsleepexp.wordpress.com

                              Comment


                              • #45
                                [QUOTE=cherokee-at-16;138937Damage from incident..plan to cut most of it off anyway..justifies cuting a clean jeep up pullen the fender off it was just floppen around ....how do you get off teh thing that hold the flares on?
                                [/QUOTE]

                                There are 10mm bolts on the inside of the fender. You'll want to either trim or pull out the mud guard in there. I just tossed mine because it fell off

                                Comment

                                Working...
                                X