Tweet
I've been all over and cant find a big enough size. Please correct me if im wrong but i need 5/16 x 4in' pull pins, correct? And were did you go to get yours??
-
4x4 Station Wagon... -
i used the stock pins...? just left them in place on the driver side and cut them down a bit, flipped em over on the pass side and trimmed aswell.#becauseJoeNitro -
he has a 98 XJ.Originally posted by JoeNitro View Post- Will
Originally posted by fizzyOriginally posted by DizzDizzComment
-
i use the stock ones1996 xj, waggy 44 front 5.13 gears aussie trussed, 3 links, 3.5" coils, spooled 8.8 rear, 38" tsl sx's, tnt front bumper, jesus freaks rear bumper, Olympic top hat roof rack, bunch of dumb shit
2001 wj tbd
1974 5 tonComment
-
I used a bolt that I grinded the threads off of to pass through the hinge, left the bottom few rows on to tighten a bolt onto. Worked fine the whole time I DD'd the thing.-Kyle
2000 XJ - it still almost looks like one.
http://www.sira4x4.net
Comment
-
I did the same but didnt even bother using a bolt on the bottom. shit stays in there just fine. heres a pic, and i think its 5/16Originally posted by BeachinXJ View Post
bottom:
top:
P8R
2012 Honda Accord - For DD/MPG Porpoises - Cooper Tire: Count on Cooper
2014 Granite Crystal WK2 Limited - Nitto Tire: Fueled by Enthusiasts
Poontang Pro 300EX 42" - For lawn porpoises
OG KOT #4736 Semper Sky Rock Racing/Standardbred Racing Designs 15.5 HP Turbo-Cool Craftsman, 6 Spd w/ crawl box, fat turf treads, Custom paint, and a red onzie
Comment
-
heres what i got they are a bit shorter now i found that the full pin for the bottom was a pita to get on and off... the top and bottom both look the same, i also put in brass bushings in there so they are still tight as brand new
Comment
Comment