Oil Pan ( someone remind me why i own jeeps?)

[CntStpTheStnk06]

OOOHHHHH I was thinking xj. never did one on any other 4.0

ya thats what i was thinking......... wellll.......... i can let you kno soon so you know for future reference

[clean4drxj]

OOOHHHHH I was thinking xj. never did one on any other 4.0

TJs' downpipe ( late 99+) wraps around the front of deep part of the pan.

[kracker]

hey at least you save on oil being that you just reduced the capacity down to three quarts,LOL


its not that bad as long as it didnt hit the pickup(which judging by the pics,you might not have)....mine was pushed in a bit and i never even had a leak or any problems....
if the jeeps runs fine and your OP is good,fuck it, just drive it...cause when you drop that pan you could opena whole can of worms too...but hopefully not...good luck!

[CntStpTheStnk06]

hey at least you save on oil being that you just reduced the capacity down to three quarts,LOL


its not that bad as long as it didnt hit the pickup(which judging by the pics,you might not have)....mine was pushed in a bit and i never even had a leak or any problems....
if the jeeps runs fine and your OP is good,fuck it, just drive it...cause when you drop that pan you could opena whole can of worms too...but hopefully not...good luck!

ya i dont think i hit the pickup, it happened at least 1500 miles ago. It went un noticed till i went to change my oil. But i have the pan/gasket ordered and napa has the oil pickup on hold for me incase. im just going to go for for it!

[Ruepart Hoaxley]

Holy fawk, man. Looks like my tranny pan did after the Jeep Rally rock garden...

[CntStpTheStnk06]

Thanks Wickedxj for the walk through !!

[Pete]

That's what my pan looks like now. Where did you order from?

[steveo]

it should be cake if its a 4.0. ive done a few in my time. jeeps are known to be leakers

[crosbike]

http://www.aev-conversions.com/shop/...nd-manual.html


i run this on my xj

[CntStpTheStnk06]

That's what my pan looks like now. Where did you order from?

called napa one of the guys there hooks me up, pan was 115 and gasket was like 20$. jeep wanted 250 for just the pan, but an insider at executive told me that i should not have an issue with the napa, and to save the cash!

[CntStpTheStnk06]

http://www.aev-conversions.com/shop/...nd-manual.html


i run this on my xj

ya already looked into it, going to grab on for the xj!!

[CSaddict]

If i get my TIG welder soon, then i'd hope to see that you're in the market for a high clearance aluminum oil pan.....

So it cracks instead of dents?

[CSaddict]

P.S. I would drop out the track bar on the axle and maybe the shocks. Im not sure how tall your truck is but mine with 4" of lift was a cunt to get out when I welded in my return for the turbo.

[Zullock Holmes]

So it cracks instead of dents?

precisely!!!!! It's recommended to use a skid under it..........

[wannabejeep]

precisely!!!!! It's recommended to use a skid under it..........

he was referring to using aluminum for a skid as opposed to steel.