Tweet
Did you just move your gas tank skid above the frame rails? Looks good dude! Now bring it to CT so we can do some real wheeling 
What did you end up doing about the water pump?
What did you end up doing about the water pump?
-
I don't always drink orange juice, but when I do, I prefer to chew it. #madpulp -
Yes i moved the skid up 6 inches but i had to do a lot of cutting haha.Originally posted by ninetysix-ex-jay View PostDid you just move your gas tank skid above the frame rails? Looks good dude! Now bring it to CT so we can do some real wheeling
What did you end up doing about the water pump?
Waterpump is a flowkooler now and its working great.
Comment
-
You notice a difference with the water pump?I don't always drink orange juice, but when I do, I prefer to chew it. #madpulpComment
-
Yes I did.Comment
-
traction bar?- Will
Originally posted by fizzyOriginally posted by DizzDizzComment
-
any thoughts on replacing your rears with fox socks?
http://www.amazon.com/Fox-River-Sock...109038&sr=8-21- Will
Originally posted by fizzyOriginally posted by DizzDizzComment
-
I don't always drink orange juice, but when I do, I prefer to chew it. #madpulpComment
-
WOOOOOOOOOW.
sigpic
Official Space Shuttle Door Gunner of the Chechnyan Space ProgramComment
-
coolComment
-
- Will
Originally posted by fizzyOriginally posted by DizzDizzComment
-
Hey your Jeep looks like mine!I don't always drink orange juice, but when I do, I prefer to chew it. #madpulpComment
-
no traction bar yet. brackets are tacked on but its cold out.Comment
-
So I got ambitious and finished up my traction bar last night. It still needs some finish work/possible more bracing.
Still need to brace the shackle and make it cleaner looking. I just wanted to go run it so i through it on. It barely contacts my floor and i baja'd the shit out of it last night so im happy with it. it is 1.75"x.120 wall DOM.
I welded everything but the axle bracket on the axle because my buddy Cory is better at the kinda confined space welding.
I welded the threaded sleeve i made for the heim to my TNT skid and I think it'll work well. I plan on dropping that pan soon and reinforcing it from the top though. Bracket and heim were from barnes4wd.comLast edited by crosbike; 12-16-2011, 12:32 PM.Comment
-
Finished the front bumper for the most part. May do some finish grinding. Added the dimple died plates.
Also braced around the gas tank and im going to stick a sheet of plywood on top of the tube so i can still use the back.
Comment
-
Nice AlexI don't always drink orange juice, but when I do, I prefer to chew it. #madpulpComment
Comment