The cute lil' green dd project

[tomatoboy]

looks great

[justtorchit]

so i sank it last weekend going thru the v-town trail...(idk how this happened)

so i had to pull the carpet, and i knew the floors were shitty, but i soon realized i had noooo floor. So i cut it all out, cleaned it all up, and now im throwin in some sheetmetal. ill prolly finish later this week, and ill hurculine it all before throwing the carpet back in. I also strengthened the leaf mounts while i was at it by bridgeing over the top and to the side of the floor.

[justtorchit]

also, does anyone know where i can find some of that sweet glue stuff that keeps the body together from the factory???

[Ktmracer419]

THE BEGINNING OF THE END

im sure the tons will find its way under here sometime down the road

[justtorchit]

THE BEGINNING OF THE END

im sure the tons will find its way under here sometime down the road

oh yeh, i got some frame stiffys to throw on too...

[netrachamp1853]

Arent doing floors fucking awsome!!!!!!.....not, lookin good tho

[bucketokarma]

Find some street signs and throw those in as floors!

Or not, I'm not going to try and tell someone else how to build their vic. I just always thought it would be wicked cool for someone to have the floorboards of their vic to be street signs, and you happen to have already ripped out what you had as floor.... Just a thought.

[clean4drxj]

if you're looking for body seam sealer you can get it napa or any automotive paint&body store will have this.

[justtorchit]

so i spent waaaaayyyyy to much time on these damn floor boards, but they came out really nice. They are made outa some pretty heavy guage steel that i had kickin around.

passengers floor




got the other side cleaned up and strengthened the leaf mount.


all welded up

sealed it up with seam sealer


all in all im happy with the way it came out. i will NEVER spend the time and aggravation to make floor boards from scratch again. i had no money so i did wut i could with wut i had.

[SupermanIce-J]

looks veddy nice!

Did you by chance template these at all??? I needs new floors.

[Hydra]

looks veddy nice!

Did you by chance template these at all??? I needs new floors.

x2, and i dont feel like buying the 34582734592 dollar ones

[justtorchit]

sorry fellas... i just used a measuring tape, cut off wheel, pliers, and a hammer. the few templates i did make were just to get the right curves on certain panels....

but if your suuuuuper nice, and realllllyy want them i can go make some templates of what i have. i think it all depends on where ya have to cut out to to get rid of the rust tho.

[Hydra]

i was just planning on doing the whole panels, as im sure they could all use to be replaced, but id certainly enjoy some templates if you have the extra time

[SupermanIce-J]

i was just planning on doing the whole panels, as im sure they could all use to be replaced, but id certainly enjoy some templates if you have the extra time

Times two... I'll throw a jar of Nutella your way for your work.

[Magilla]

street signs> sheet metal