Tweet
aussies ftw.
-
2000 XJ: "The Black Jeep"MK2 Jetta > M3Chairman of the Chechnyan Space Program -
awesome juan! get an aussie too
97 TJ that I think is pretty neat.
Comment
-
So today I ordered:
For the D44
-Powertrax locker (aussies were on backorder)
-New Carrier
-Bumpstops for bumpstop plates
-Riddler Diff Cover
-Lube Locker Gasket
For the D30
-4.56 gears
-Master Install Kit
-New Carrier
-Riddler Diff Cover
-Lube Locker Gasket
In the parts pile I have 2 Fox 2.0 shocks for the rear that I just rebuilt with new Polly bushings to replace the rubber ones. I also have frame stiffeners which will go in when I install my long arms since I'll have to cut them around the new cross member
All in all, not a bad way to dump over 1K in parts IMO. Time to get this build moving again
I don't always drink orange juice, but when I do, I prefer to chew it. #madpulpComment
-
Looks good I'm down to helpDizz dizz go sleep sleep
Driver 4677 FSM vehicleComment
-
will was so excited to spend money that wasn't his
mrs. heavymetal from jeepforum
2022 JL Rubicon
Originally posted by hoggie101
and everyone qute dis because its the best grammer im going to have all yearComment
-
hahahaha I love doing that too.Originally posted by Lawn Guyland View Postwill was so excited to spend money that wasn't his
Sounds like a nicey nice parts list. I like it like WOAH BLACK BETTY!2013 F150 fx4 (Tow Pig/DD)- 5.0 with the 3.73 option
2003 TJ Rubicon- 4.0/42rle/np241or
- 5.13's
- 3" Savvy/Currie suspension with acos
- 33” BFG KO2s
Comment
-
Nice Jon!!!!!! did you decide on what long arms you are getting?
97 TJ that I think is pretty neat.
Comment
-
TALK TO ME JON...........Originally posted by CumminsJeep View PostNo worries, I'm not actually back, I'm just reminiscing about the old days.
ForSure Motorsports
Win or Lose, We Booze.
Vice President of Internal Affairs at Dirty Donny's House of HookersComment
-
WIN.Originally posted by ninetysix-ex-jay View PostTime to get this build moving again2009 silver JK - destination beachy jeepJ10 project do want."attack life. its just going to kill you anyway"Comment
-
Dont, Clayton parts suckOriginally posted by JeepBabiiXJ View Post
Just kidding. but in all seriousness get Claytonian or Y-Link.
97 TJ that I think is pretty neat.
Comment
-
Originally posted by CumminsJeep View PostOriginally posted by JeepBabiiXJ View PostOk ok ok well I was going to hold off but I do have myself set on the Clayton Long Arms. The only deciding factor depends on when the new gears come in and how cold it gets. However if you guys want to take my Jeep while I'm on the ship and treat me to a long arm kit I'll have no second thoughts on just waiting a few monthsOriginally posted by CumminsJeep View PostDont, Clayton parts suck Just kidding. but in all seriousness get Claytonian or Y-Link.
I don't always drink orange juice, but when I do, I prefer to chew it. #madpulpComment
-
Today the JKS BPE's came in so I finished putting the new poly bushings in the Fox's and installed the BPE's. I ran out of sunlight so tomorrow they should be installed
I don't always drink orange juice, but when I do, I prefer to chew it. #madpulpComment
-
wait, those foxes are for the rear?Originally posted by ninetysix-ex-jay View PostToday the JKS BPE's came in so I finished putting the new poly bushings in the Fox's and installed the BPE's. I ran out of sunlight so tomorrow they should be installed
97 TJ that I think is pretty neat.
Comment
-
Yes the fronts will be replaced with something else when I get back home in March. I want to run something with a res. up frontOriginally posted by CumminsJeep View PostLast edited by ninetysix-ex-jay; 11-18-2010, 06:31 PM.I don't always drink orange juice, but when I do, I prefer to chew it. #madpulpComment
-
Wintastic.2000 XJ: "The Black Jeep"MK2 Jetta > M3Chairman of the Chechnyan Space ProgramComment
Comment