Comanche Build, Dr. Thunder's

[Ktmracer419]

creepy....


ill give you my 190 or whatever it is next time i sees you

oh and your table

[DrThunder]

What kind of wheels are you going to use now? Some kind of bead lock? steel or aluminum?

Pretty much what i can find that doesnt make me super fuggin wide, a guy at work is bringin some ford alumies in tomorrow so I can measure up the dimensions. I really want to find some 8" rims to squeeze them on. I may look into the stauns bead locks too if I do that. The aluminum rims appeal to me cause right now each wheel (h1s and sx's) weighs about 200 lbs and the renix dun like it mucho.

If those fall through I am goin with the original plan and that is to find some old truck steelies and do weld on bead locks

[DrThunder]

creepy....


ill give you my 190 or whatever it is next time i sees you

oh and your table

bangin.

[HeavyMetal]

The aluminum rims appeal to me cause right now each tire weighs about 200 lbs and the renix dun like it mucho.

If those fall through I am goin with the original plan and that is to find some old truck steelies and do weld on bead locks

each creepy crawler weighs 200 pounds? i find this hard to believe

[DrThunder]

each creepy crawler weighs 200 pounds? i find this hard to believe

no, each tsl sx with hummer rim and run flat weighs 200 lbs. my bad wording will fix now

[HeavyMetal]

no, each tsl sx with hummer rim and run flat weighs 200 lbs

More easily believable.

[HitItWithSomeSpeed]

no, each tsl sx with hummer rim and run flat weighs 200 lbs.

I better start working out.

[grundlepunch]

Fucking sick man! Getting shit done

[DrThunder]

Got quotes on 100ft of tubing,

-1.75 hrew .120 wall 100' is 340ish
-1.75 Dom .120 wall 100' is 480ish

Had no idea it was going to be that cheap, I will end up buyin either all Dom or I may skimp and buy some hrew for the lesser important items.

Couldn't get any 7/8 18 bungs for the weekend so the steering will have to wait. Still lookin for 8" stock steelies in the 8 lug 16" flavor.

[Ktmracer419]

dayum

where are ya sourcing it from?

think if we get a bigger group buy goin we could save a lil' more coin?

ill get the bank shit done on friday and see ya sometime this weekend

[grundlepunch]

midcity?

[Mike]

there is race shop in preston that builds race cars and I was told I could get the bungs there.

[justtorchit]

SPAFCO

[Zullock Holmes]

Got quotes on 100ft of tubing,

-1.75 hrew .120 wall 100' is 340ish
-1.75 Dom .120 wall 100' is 480ish

Had no idea it was going to be that cheap, I will end up buyin either all Dom or I may skimp and buy some hrew for the lesser important items.

Couldn't get any 7/8 18 bungs for the weekend so the steering will have to wait. Still lookin for 8" stock steelies in the 8 lug 16" flavor.

may have a set of wheels for you, give me a day or two and let me find out if my buddy still has them

[murdered out manche]

rele enjoy checking in to see wat u got going on with ur comanche.. sick rig man, glad u decided to do the cage before the v8
sucks u dont live around here i just got a quote for 100' of 1 3/4 .120 wall dom at 3.17 per ft... and 1 1/4 sched 40 for 1.17 ft