The price of the complete 'Lower Door Guards' is 225.00+shipping, the upper 1/4 panel guards are 250.00+shipping. The tail light boxes are 160.00+shp for the 97-2001. The 84-96 boxes are 140.00+shp. Both are only the metal boxes. They will use a standard oval incandescent light or an oval LED and a round back-up light. All pieces will ship raw steel. Standard holes will allow the use of #12 pan head sheet metal screw or a 3/16" closed rivet for mounting the panels to the body.
All of the body armor is made from .119/11 ga. cold rolled steel. The design has evolved over 8 years of off roading. The use of 11 ga. CRS is to acheive the most protection possible while not risking the inner structure of the door or body of the vehicle. Its a "bend not break" type solution to common damage areas of the Jeep Cherokee.
I have tried different/thicker material over the years to only find that they will destroy the inner door structure before they yeild themselves. This is not a good situation. I also tried .187 for the upper 1/4s to find that after a few good hits they wrinkled the 'C' and 'D' pillars. I have used this armor for 8 years and on 5 different trucks, it has been the best solution to trail damage I have found.
Here is a write-up for a customer of mine and a few pictures. Please let me know if there is anything else I can do for you or anyone in your club.
Chris Lasater
Total Fabrication Solutions LLC
Colorado Springs, CO 80915
719-574-6998
P8R
2012 Honda Accord - For DD/MPG Porpoises - Cooper Tire: Count on Cooper
2014 Granite Crystal WK2 Limited - Nitto Tire: Fueled by Enthusiasts
Poontang Pro 300EX 42" - For lawn porpoises
OG KOT #4736 Semper Sky Rock Racing/Standardbred Racing Designs 15.5 HP Turbo-Cool Craftsman, 6 Spd w/ crawl box, fat turf treads, Custom paint, and a red onzie
Comment