Rock sliders for the jk?

[Riot]

JCR are half the cost of PSC. And they love Jesus.

Or you could leave it stock and use the money for another car payment. Or 10 tanks of gas.

Thanks. Like I said, it just looks naked. Lol

[Riot]

And less than 10 tanks. Lol

[#DEZERTDAD]

JK's are the newest "midlife crisis" vehicles for old men here on Shit Island and all the rich spoiled little fucks that just want to drive a "look at me" vehicle. Opinions on anything are like assholes, everybody has one. Stop being a whining moist pussy and buy whatever product you like for the damn thing

[Ruepart Hoaxley]

You can find the Rubicon ones cheep from people that put PSC/Genright/JCR ones on.

[CumminsJeep]

I agree PSC is amazing stuff and if you are abusing it and want to spend a few bucks on a top of the line set (or just bragging rights) go right ahead. I think their stuff is baller on JKs but I'm not the one with the JK. But let's get real in this situation….we know Chris is not going to wheel anytime soon. And its not like PSC metal is better than the metal any of the cheaper competitors are using. Maybe they use 1/4" instead of 3/16." Who cares when they aren't being used and are just for looks. And it's not like cheaper ones are just going to crumble after a couple years. It's not like we are comparing a Rustys LA kit vs. a Clayton LA kit. We are comparing a piece of metal to a piece of metal.

My point is, find something that fits your budget and you will like the look of them. And its not like the cheaper ones can't bounce off a couple rocks down the road. Because even if you spend 800 bucks on a set of sliders, what good are they if you think they look like shit.

[Riot]

I agree PSC is amazing stuff and if you are abusing it and want to spend a few bucks on a top of the line set (or just bragging rights) go right ahead. I think their stuff is baller on JKs but I'm not the one with the JK. But let's get real in this situation….we know Chris is not going to wheel anytime soon. And its not like PSC metal is better than the metal any of the cheaper competitors are using. Maybe they use 1/4" instead of 3/16." Who cares when they aren't being used and are just for looks. And it's not like cheaper ones are just going to crumble after a couple years. It's not like we are comparing a Rustys LA kit vs. a Clayton LA kit. We are comparing a piece of metal to a piece of metal.

My point is, find something that fits your budget and you will like the look of them. And its not like the cheaper ones can't bounce off a couple rocks down the road. Because even if you spend 800 bucks on a set of sliders, what good are they if you think they look like shit.

You know what... I would completely ride a roller coaster with you.

[Lawn Guyland]

did the JK come with trim?

[HeavyMetal]

It's not like we are comparing a Rustys LA kit vs. a Clayton LA kit. We are comparing a piece of metal to a piece of metal.

Arent you just the beacon of logical profroundness

[Ruepart Hoaxley]

Is Rusty's made out of plastic?

[CumminsJeep]

Arent you just the beacon of logical profroundness

AWWWWWW WILLLLLLYYYYYYYY

[Riot]

did the JK come with trim?

No... But I added some.

[HeavyMetal]

No... But I added some.

universe implosion?

[calvynandhobbs]

My 2 cents is go with something your JK will grow into if you actually will convert it to a toy in the future. You can't go wrong with JCR stuff. They built some custom sliders for my Bronco years ago and have furnished several parts since then. Their products are top notch.

[Odinthor]

Yes, because I read a single review and came back to debate it with you all.
For fuck's sake, did you even read this?
All I said was there were reviews saying that other rock sliders were good choices.
Shut up, eh.

Good thing I never implied you only read one fucking review, but instead made a general statement about me personally trusting the advice of someone I know over the advice of someone I dont know. But fuck me eh?

You find twelve random guys who all agree that a certain rock slider is amazing, and is cheaper than PSC, then you wont get any shit from me about it. I didnt say Nicole's opinion was the only one that mattered, nor would I ever (Sorry Nicole, tough noogies )

Get whatever the fuck you want Dickerman, its your Jeep.

[Pedro]

I agree PSC is amazing stuff and if you are abusing it and want to spend a few bucks on a top of the line set (or just bragging rights) go right ahead. I think their stuff is baller on JKs but I'm not the one with the JK. But let's get real in this situation….we know Chris is not going to wheel anytime soon. And its not like PSC metal is better than the metal any of the cheaper competitors are using. Maybe they use 1/4" instead of 3/16." Who cares when they aren't being used and are just for looks. And it's not like cheaper ones are just going to crumble after a couple years. It's not like we are comparing a Rustys LA kit vs. a Clayton LA kit. We are comparing a piece of metal to a piece of metal.

My point is, find something that fits your budget and you will like the look of them. And its not like the cheaper ones can't bounce off a couple rocks down the road. Because even if you spend 800 bucks on a set of sliders, what good are they if you think they look like shit.

Youre so grown up!