bilstein..?

[Even]

I think your best bet would be to measure shit up after you bumpstop and trim, then see if you have enough room for 10's.

[Burton58]

i might have to, though i have no shocks to run till i get money for new ones

[Ktmracer419]

i was going to make a thread about this seeing as i want to get 5150's. thanks for saving me the trouble joe.

looks like 8" travel all around is ideal for 3.5" lift?

basically (with stock mounts)

i think im going to go with 10 front and 8 rear because im going to make high clearance rear shock mounts...

at 4" o lift and 8" shocks with high clearance mounts i bottomed them out constantly and broke some parts

Sam can correct me if I'm wrong, but I'm pretty sure he ran 10's on 3".

I guess it also depends on what tires you plan on running, because that will effect bumpstops.

only in front


now i run stock length in back

my mounts are pretty much as low as you can go on the axle tube

[Burton58]

i'll be running stock mounts as well. 8" it is....

[Ktmracer419]

[Burton58]

otay bumping this. if i get the bilsteins i'm gonna need these gobshites up front right? rear should be good to go?



just double checking

[HeavyMetal]

correct.

[Burton58]

gracias mi amigo

[Riot]

itlooks so nice out in RI.

[Ruepart Hoaxley]

these.

http://www.polyperformance.com/shop/...ocks-p-84.html

you wont do it

[Even]

these.

http://www.polyperformance.com/shop/...ocks-p-84.html

you wont do it

Those are some nice big black cocks.

[Ktmracer419]

itlooks so nice out in RI.

that was taken like months ago lol

[Zullock Holmes]

otay bumping this. if i get the bilsteins i'm gonna need these gobshites up front right? rear should be good to go?



just double checking

those.... driver side for me was a bitch and a half, they give you the nuts with the poly HMDFTQKEODLEKDIV in them. and trying to do it without and extra hand or a large enough socket blew massive monkey nuts.

i thinks i needs to order me some bilsteins real soon.

[Ktmracer419]

bling bling option

http://tandjperformance.com/store/in...&products_id=7

[Burton58]

teraflex ones are 5 bucks cheaper than the jks on qtec. they are the same damn thing