Announcement

Collapse
No announcement yet.

torque converter chatter?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    just took all bolts out
    marked the flywheel

    ran the motah and was like "SWEET NO VIBES"

    rotated flywheel 180 degrees

    put bolts back in fingah tite

    then tightened each down

    still there

    i think i have a bent flywheel though

    3 of the holes on the flywheel are flush with the torque converter, and one i have to "pull" in about 1/8". that might not be the cause of the problem, but when im in there ill replace it anyway.

    still puzzles me that it was perfect for 60 miles then decided to get all crazy
    www.eatsleepexp.wordpress.com

    Comment


    • #17
      Originally posted by Ktmracer419 View Post
      just took all bolts out
      marked the flywheel

      ran the motah and was like "SWEET NO VIBES"

      rotated flywheel 180 degrees

      put bolts back in fingah tite

      then tightened each down

      still there

      i think i have a bent flywheel though

      3 of the holes on the flywheel are flush with the torque converter, and one i have to "pull" in about 1/8". that might not be the cause of the problem, but when im in there ill replace it anyway.

      still puzzles me that it was perfect for 60 miles then decided to get all crazy
      Put a strait edge across it. Or pull you old flywheel
      I don't always drink orange juice, but when I do, I prefer to chew it. #madpulp

      Comment


      • #18
        i have 2 good flywheels/flexplates
        www.eatsleepexp.wordpress.com

        Comment


        • #19
          flexplate

          flywheel is for manual

          Comment


          • #20
            Originally posted by crosbike View Post
            flexplate

            flywheel is for manual
            people know what im talkin about
            www.eatsleepexp.wordpress.com

            Comment


            • #21
              Originally posted by crosbike View Post
              flexplate

              flywheel is for manual
              the whole time reading this thread i was thinking the same thing

              97 TJ that I think is pretty neat.

              Comment


              • #22
                how is the mount holding t-case/tranny in place ?
                up to 40% off parts from advance auto parts, buy online and pick up at store for free-click here!
                eliminator MJ - Sold
                99 TJ on 36's - Sold 95 ZJ -parted out/scrapped
                Current Project - 'Family hauler' 2001 XJ

                Comment


                • #23
                  Originally posted by 1cleantj View Post
                  how is the mount holding t-case/tranny in place ?
                  tranny mount?
                  www.eatsleepexp.wordpress.com

                  Comment


                  • #24
                    Originally posted by Ktmracer419 View Post
                    tranny mount?
                    yea sure, not familiar with XJ setup so said both figure with an auto if the mount was bad, it would cause some shaking
                    up to 40% off parts from advance auto parts, buy online and pick up at store for free-click here!
                    eliminator MJ - Sold
                    99 TJ on 36's - Sold 95 ZJ -parted out/scrapped
                    Current Project - 'Family hauler' 2001 XJ

                    Comment


                    • #25
                      Originally posted by 1cleantj View Post
                      yea sure, not familiar with XJ setup so said both figure with an auto if the mount was bad, it would cause some shaking
                      its 100% coming from the bellhousing. it makes a hella noise
                      www.eatsleepexp.wordpress.com

                      Comment


                      • #26
                        Originally posted by crosbike View Post
                        flexplate

                        flywheel is for manual
                        It fits the definition of a flywheel
                        I don't always drink orange juice, but when I do, I prefer to chew it. #madpulp

                        Comment

                        Working...
                        X