What " lift with tube fenders and 35s?

[1cleantj]

Did you trim your rear at all?

no rear isnt trimmed at all, with bump stop and rim's spaced outwards I havent had any issue's. I cant find my rti score paper but pretty sure it was like 780ish with fixed CA's and rear swaybar connected still. which isnt to bad, I can put my front tire on a rock 3.5ft tall and the rear tire will still be on the ground.



rear stuff's but doesnt rub (6" rear flares)

fender flare removed to show it dont even touch with the highlined stock fenders (pic taken diff time then first)

[creepwj]

do the home brew high line kit on the front and rear save a good chunk of change and do the 2.5" lift.

aev advertises you can fit 37s on a 3" kit with high line fenders so 35s on a 2.5" should be mint

[XJtheXtremeJeep]

Check out the metalcloak arch or overline fenders.... they claim 35s with no lift...

[MikalCarbine]

The more I think about it and see other builds, higher lift is necessary, and 2.5" with 35" tires with tube fenders looks really funny, like a small dune buggy or something..

I'll probably spring for a higher lift, which means I won't be able to build up my SL until the time comes, running 31s on 4" of lift would look stupid haha

[Riot]

I ran stockers on a tall 3.5" lift. It looked awesome.

[grundlepunch]

I've read TnT tube fenders are different and have more of a recess inside to be able to stuff tires nicely, money won't matter once I get the build going this summer, I'm just curious about lift requirements

i dont see how, not without cutting the hood and moving your fender up
its marketing BS

[1cleantj]

i dont see how, not without cutting the hood and moving your fender up
its marketing BS

tube fenders have less sheetmetal from the front door edge to the wheel opening, which some would hit otherwise as the axle rotate's up/towards the body, (mostly with short-arm's that make the WB a little shorter)

[CntStpTheStnk06]

will u need to regear with 35's?

[grundlepunch]

will u need to regear with 35's?

YES

[CntStpTheStnk06]

YES

i figured but just wanted to make sure.

[wannabejeep]

and your dana 35 with implode, turning into a massive black hole, sucking the rest of your jeep in.

[clean4drxj]

time for an 8.8 install

[MikalCarbine]

LOL yes I'm going to regear, and I have a D44 rear, I'll be upgrading the shafts and c-clip eliminating my front and whatever else I'll need to do to run 35s

[Hydra]

no c-clips in front, just fyi

[robs02tj]

this is mine with a super lift 4" ,only netted 3" of lift with 33's and no cutting, front disco'd and stock flares just starting to rub with stock bumps with 15x10 rims

just my 2 cents