Tweet
Got 2 codes po133 and po171 put in a new o2 and everything and the cods wont go away ever it bucks jerks and pisses me off my header is cracked it may be the issue i dont know any help??
-
-
TPS, MAP, etc. check them all out for a good reference voltage. Mine did the same thing and I put in a new TPS and it is fine.
97 TJ that I think is pretty neat.
-
have you had it scanned since you installed the new sensor?
po133 should be sensor one, somethin or other, google says "slow response"
and po171 indicates a lean a/f ratio.Comment
-
yes i rescanned it since im not posting on my phone now heres the whole story,...
thursday did a clutch ran fine before i did the clutch that day put it all together... got the CEL for the o2 sensor running high voltage so i figured hell put in a new o2 still nothing.. clear the code and drive around... as im driving around i smell the god auwful smell from my exhasut and a tone from my muffler that isnt right.. it sits there and sputters but when i drive it its shitty then all of a sudden it will pick up and go... i drove 36 miles on 1/2 tank of gas tonight..... something is sierously wrong and i need to fix this asap.... and the codes do not go away at alll
also can a cracked header cause this problem due to un meterd air?Last edited by WTNFDXJ; 10-25-2009, 01:38 AM.Comment
-
Ok well got up for the truck pulls in middletown this morning and the cel cleared it self and all seems to be okComment
-
Ok jeeps still fucked raw fuel smell hesitation bucking and thats even after i welded the header cracks no cel yet but still shittyComment
-
i had a cracked header the whole time and it was fine, so i doubt it is thatP8R
2012 Honda Accord - For DD/MPG Porpoises - Cooper Tire: Count on Cooper
2014 Granite Crystal WK2 Limited - Nitto Tire: Fueled by Enthusiasts
Poontang Pro 300EX 42" - For lawn porpoises
OG KOT #4736 Semper Sky Rock Racing/Standardbred Racing Designs 15.5 HP Turbo-Cool Craftsman, 6 Spd w/ crawl box, fat turf treads, Custom paint, and a red onzie
Comment
-
My jeep does this.
It bogs/sputters out for a few minutes while I first get it running, and even sometimes past that. a CEL will sometimes pop up but it doesn't have too, and its for an upstream O2 sensor. I'm convinced thats it but I haven't fixed it. It doesn't bother me much.-Matt
FacebookComment
-
I had a similar problem. I have a misfire though, and no CEL's to go on. You guys are cheaters.
1993 XJ sport 3.5" rustys 33" MTZ's armored.
1999 sierra
1967 M725 Big and Slow
-DanComment
-
ok well i welded the header.. cleaned all connectors reset the ecu and bam runs minty!!
Comment
-
for now.....Originally posted by Ktmracer419Comment
-
uhm my jeep has never had a problem before the studs were banged outa the header and cracked it... so i am puttin 2 and 2 together and that was my issueComment
Comment