I've had the same sub and amp set up for the past few years. I just like my music to have some bass but I have no desire for high quality equipment or tuning it perfectly or anything else. Anyways, I havent touched anything regarding my head unit, wires, or sub/amp in about a year. The other day randomly when I went to leave work I turned my jeep on and the sub was "firing" over and over again at the same tone, without regard for whatever level my stereo was at. I haven't had time to look at that much but as far as I can tell absolutely nothing has changed.
Still have a good ground, connections behind my h/u are fine, power and signal wire is connected properly. I know this is kind of vague but if anyone could help I'd appreciate it. Today I disconnected everything and re-connected it and it worked for a little while, but when I turned the radio up to where its a little louder, so like I could hear it clearly with my windows down while I'm moving, it did the same thing. Just started firing. For right now its disconnected. Just wondering if anyone has any input? The amp does not go into protection mode or whatever thats called. It just stays on and will continue to "fire" the sub.
Still have a good ground, connections behind my h/u are fine, power and signal wire is connected properly. I know this is kind of vague but if anyone could help I'd appreciate it. Today I disconnected everything and re-connected it and it worked for a little while, but when I turned the radio up to where its a little louder, so like I could hear it clearly with my windows down while I'm moving, it did the same thing. Just started firing. For right now its disconnected. Just wondering if anyone has any input? The amp does not go into protection mode or whatever thats called. It just stays on and will continue to "fire" the sub.
Comment