Announcement

Collapse
No announcement yet.

taillight wiring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • taillight wiring

    so i slap rigged a trailer wiring harness into my xj's tailights and plugged it into my friends car trailer lights and blew out my tailight minor circuit on the driver side cause the wiring for the trailer lights were shabby as fuck and shorted out.

    my question is whether or not the left and right taillights are on separate fuses because the passenger minor circuit still works and the bulbs are not blown on the driver side and just to test i swapped in the 3157s from my amber socket and it still didnt work... if not that wheres the most likely spot i have a burnup in the circuit thats causing this?
    Last edited by Lycaon; 07-19-2009, 12:55 AM.
    2005 Jeep Wrangler Rubicon Unlimited
    1945 Willys-Overland CJ2A

  • #2
    nobody knows if the right and left taillights are on different circuits?
    2005 Jeep Wrangler Rubicon Unlimited
    1945 Willys-Overland CJ2A

    Comment


    • #3
      on my tj they are on the same circuit. when i wired up y LED's i blew a fuse and both sides went. but a tj is not a xj soo...
      "when I'm riding my motorcycle,I'm glad to be alive...when I stop riding my motorcycle,I'm glad to be alive"

      Comment


      • #4
        i assume that they are. why did you 'slap rig' together a harness when you can literally pull the harness and plug in a T connector?

        Comment

        Working...
        X