I just got a loghtbar from my brother or 20 bucks, complete with 4 100w lights, I was just wondering what everyone else did to run their wires into the engine bay, I don't feel like drilling through the roof if I can help it.
Announcement
Collapse
No announcement yet.
Light bar technofab
Collapse
X
-
ran mine back to the hatch, between the body and the hatch and then into the hole where the washer fluid line runs from the body to the hatch and then inside all the trim all the way to the firewall and to the battery.
It probably be easier to drill a hole. If you are worried about leaks, use RTV to seal it.
Comment
-
i was so against drillin in my roof forever and had all these elaborate work arounds. i finally said Fuck it and drilled a hole, installed a gromet on it, and sealed it with marine silicone. worked, cant even really see it anyway, and its clean cuz its a gromet anyway- Will
Originally posted by fizzyor am asians pants not a read end lol.Originally posted by DizzDizzaliens probed my husband
Comment
-
i ran mine all the way back tucked it into the hatch seam and under the truck along the frame rail up into the battery hahaha. the wire never went inside my truck. then i hit a tree and ripped one of the lights off and they dont exist no more
im gettin a rack soon and ill be doin more lights and imma just drill the roof RTV FTMFW#becauseJoeNitro
Comment
-
Originally posted by wannabejeep View PostHA! I forgot that some fancy people have headliners....must be nice
Bushwacking claimed my light bar years ago. Along with my fire stick, and original front clip, and passenger's fender, and both mirrors and a half a dozen marker lights
Comment
-
Originally posted by snowblur17 View PostYou did the headliner removal mod too?
Bushwacking claimed my light bar years ago. Along with my fire stick, and original front clip, and passenger's fender, and both mirrors and a half a dozen marker lights1993 XJ sport 3.5" rustys 33" MTZ's armored.
1999 sierra
1967 M725 Big and Slow
-Dan
Comment
-
exhaust leak mod, check
Rocker removal mod, check
O and PS I ran a wire along the weather stripping of my drivers door then drilled a hole in the rain gutter for the wire to pass through and epoxied the hole up and used plastic wire tubing stuff to run the wire through to the lights.... didn't really like this set up
Comment
Comment