How do i install stock t case skid... ASAP

[Capt. Crunch]

I picked up a stock t case skid today and cant figure out how to bolt it on. I cant see where it bolts on but dont see how the bolts fasten.. ???

[Ktmracer419]

go to a GOOD hardware store, not home guido, not lowes

and pick up some nutserts

if you went to a good hardware store the guy working there should be able to tell you how to install them

be sure to measure the holes in the unibody, i forgot what diameter they are

[Capt. Crunch]

what about the cross member side.. does the cross member open up when you take it off?

[XJLI]

i used self tappers on the unibody side, and gr8 nuts and bolts on the x member. took 15 mins.

[Capt. Crunch]

but on the x member side. do you take it off? how do you get the bolt through or to the bolt head?

[XJLI]

but on the x member side. do you take it off? how do you get the bolt through or to the bolt head?

there are holes that line up with the holes on the skid, just fish the bolts/washers/nuts through.

[Ktmracer419]

i used nutserts on the crossmember and unibody