Announcement

Collapse
No announcement yet.

SYE help...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • SYE help...

    running 6" lift i need an SYE kit and shaft. whats good? whats not? any specifics i should know? any help is appreciated.
    ive looked at tom woods, JB conversions, advanced adapters. there are so many diff choises and variables im a lil lost.
    #becauseJoeNitro

  • #2
    Get the PORC SYE and run an auto XJ front shaft.
    -Caleb

    Crawl Daddy Champion 2011

    1999 XJ 4 inchs of lift or so, 35s and some other stuff.

    Comment


    • #3
      what rear axle?

      if you have less lift and a d44 or 8.25 you can run a stock front xj shaft (from and auto) if you have a d60 you can run a 5 speed shaft.

      you might be able to run a auto shaft that high, but its gonna be pretty extended
      www.eatsleepexp.wordpress.com

      Comment


      • #4
        Originally posted by Bigbike View Post
        Get the PORC SYE and run an auto XJ front shaft.
        lately i've been hearing some bad stuff about PORC, they were banned from pirate

        Comment


        • #5
          I was just saying that because a lot of people here run their SYE.
          -Caleb

          Crawl Daddy Champion 2011

          1999 XJ 4 inchs of lift or so, 35s and some other stuff.

          Comment


          • #6
            i have an 8.25 sam. im thinkin about getting the advanced adapters one from rustys $200 and running a auto xj front shaft used $60. seems to be the best way. cheepest too.
            #becauseJoeNitro

            Comment


            • #7
              cheepest after rustys shipping?
              www.eatsleepexp.wordpress.com

              Comment


              • #8
                Originally posted by Ktmracer419 View Post
                if you have less lift and a d44 or 8.25 you can run a stock front xj shaft (from and auto) if you have a d60 you can run a 5 speed shaft.
                so what your saying is the 5 spd. shafts are shorter?

                Comment


                • #9
                  i would run AA or the super short from JB both are great i have the AA
                  1991 YJ, 1 tons, locked, lots o armor, stretched, cage

                  Comment


                  • #10
                    Originally posted by Jeepbonehead View Post
                    i would run AA or the super short from JB both are great i have the AA
                    give me one good reason why it is worth it to buy a super sort sye on an xj, go
                    www.eatsleepexp.wordpress.com

                    Comment


                    • #11
                      JB is deff the best one in my opinion its well though out but its $299. and then what do i use for a shaft cuz its so short a stock front shaft wont fit no?
                      #becauseJoeNitro

                      Comment


                      • #12
                        Originally posted by fullwidthxj191 View Post
                        so what your saying is the 5 spd. shafts are shorter?
                        that is kinda what im sayin at yo
                        www.eatsleepexp.wordpress.com

                        Comment


                        • #13
                          yea i dont see a need for it im not in any competions lol just dont wnat my shaft falling out
                          #becauseJoeNitro

                          Comment


                          • #14
                            I had JB conversions

                            They have a nice product, and great instructions

                            And please don't bring it to SVE to have it installed. I know of a good jeep shop in Durham
                            1950 Willys Trail Rig
                            2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4

                            Comment


                            • #15
                              AA, PORC, RE, omix-ada, tom woods, JB (cept the super short)...

                              all the same fucking shit manufactured in the same plant in china.

                              buy the cheapest one and be happy.

                              Comment

                              Working...
                              X