I have a 01' VW golf 1.8t with 80,000 on the clock but I don't know much about VW's....I've been a jeep guy and still own one and those jeep inline 4 cly engines are SOOO basic compared to my VW
The car is a hard start at times, the idle drops down then bumps up, sluggish when i hit the gas. It even shut off on me while driving more than once and the CEL light would blink.
I have a bunch of CEL codes:
P0300 Random multiple misfire
P0301 cyl 1misfire
P0303 cyl 3 misfire
P0304 cyl 4 misfire
P0302 cyl 2 misfire
P0011 Intake (A) Camshaft position timing-over-advanced (bank 1)
P0102 mod $10 mass ore volume flow A circuit low input
P0237 Turbo charger or boost sensor A circuit low
P0012 intake (A) camshaft position timing-over-retarded (bank 1)
P0341 MOD $10 camshaft position sensor A circuit range/performance B1
P0106 MOD $10 manifold absolute pressure barometric pressure sensor range/performance
P2138 MOD $10 throttle/pedal position sensor/switch D/E voltage correlation
I changed the spark plugs, all 4 coil packs and the camshaft position sensor. I've read on a VW forum that I might need to change the Crankcase breather valve(whatever that is). I'm trying to avoid changing the timing belt because who has $700-$1000 to spend on that?? If anyone is in the southern CT area and would be be willing to take a look, it would be awesome
Any help would be much appreciated!
The car is a hard start at times, the idle drops down then bumps up, sluggish when i hit the gas. It even shut off on me while driving more than once and the CEL light would blink.
I have a bunch of CEL codes:
P0300 Random multiple misfire
P0301 cyl 1misfire
P0303 cyl 3 misfire
P0304 cyl 4 misfire
P0302 cyl 2 misfire
P0011 Intake (A) Camshaft position timing-over-advanced (bank 1)
P0102 mod $10 mass ore volume flow A circuit low input
P0237 Turbo charger or boost sensor A circuit low
P0012 intake (A) camshaft position timing-over-retarded (bank 1)
P0341 MOD $10 camshaft position sensor A circuit range/performance B1
P0106 MOD $10 manifold absolute pressure barometric pressure sensor range/performance
P2138 MOD $10 throttle/pedal position sensor/switch D/E voltage correlation
I changed the spark plugs, all 4 coil packs and the camshaft position sensor. I've read on a VW forum that I might need to change the Crankcase breather valve(whatever that is). I'm trying to avoid changing the timing belt because who has $700-$1000 to spend on that?? If anyone is in the southern CT area and would be be willing to take a look, it would be awesome
Any help would be much appreciated!
Comment