Announcement

Collapse
No announcement yet.

rustys vs warn

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #1

    rustys vs warn

    Its time to get a new tcase skid and im looking at warn and rustys which is better? I like warns because it looks like it hangs down less but rustys has a angled edge and mounts to the unibody sidealso

    Also on a side not how are rustys engine and trannys skids it looks like it mounts to the upper control arm mounts which is good because I still have them with my clayton long arms guess its good to be lazy sometimes
    Last edited by hoggie101; 05-22-2013, 09:50 AM.
    2000 xj 4.5 clayton longarms with wontons with a touch of
    97' zj
    2012 surbra imperza DD
    im a motivation machine like the hammer and sickle in communism
    Tags: None
  • #2
    Get the Clayton belly skid and make a rear support for it


    Sent from my pay phone in Chechnya
    2000 XJ: "The Black Jeep"
    MK2 Jetta > M3
    Chairman of the Chechnyan Space Program

    Comment

    • #3
      My plan is to make and engine/trans skid that goes from the crossmember forward and mounts with supports to the motor mounts.

      Edit: I just realized the Clayton kit is exactly what I plan to build. I would definitely go with that over attaching to your control arm mounts. I also never liked how it had to jog over the front driveshaft, seems weak to me.
      Last edited by Harry; 05-22-2013, 10:57 AM.
      97 XJ.

      Comment

      • #4
        Originally posted by Harry View Post
        My plan is to make and engine/trans skid that goes from the crossmember forward and mounts with supports to the motor mounts.

        Edit: I just realized the Clayton kit is exactly what I plan to build. I would definitely go with that over attaching to your control arm mounts. I also never liked how it had to jog over the front driveshaft, seems weak to me.
        Idk if im gonna do the front skid I was just thinking what if and I need some under shots of claytons xj with the skid on it please
        2000 xj 4.5 clayton longarms with wontons with a touch of
        97' zj
        2012 surbra imperza DD
        im a motivation machine like the hammer and sickle in communism

        Comment

        • #5
          There's some on the website, look at the pictures for the coil conversion kits.


          Sent from my pay phone in Chechnya
          2000 XJ: "The Black Jeep"
          MK2 Jetta > M3
          Chairman of the Chechnyan Space Program

          Comment

          • #6
            I have the warn on my wrangler, I can't complain too much because it did its job, but it seem cheap. I believe it's 1/8th thick, I've bent it several times, hammered it flat and welded in 1/4 strips and bent it again. I heard good things about skid row, theirs attached to the motor mounts I think and made from 3/16's.
            Don't Panic

            Comment

            • #7
              This is more about t case skids people
              2000 xj 4.5 clayton longarms with wontons with a touch of
              97' zj
              2012 surbra imperza DD
              im a motivation machine like the hammer and sickle in communism

              Comment

              • #8
                Why you need skids? You wheel?

                Comment

                • #9
                  I had the skidrow. Same as the other 2 pretty much, look into them as well
                  I drive a Datsun

                  Comment

                  • #10
                    Does Kilby still make theirs?
                    P8R

                    2012 Honda Accord - For DD/MPG Porpoises - Cooper Tire: Count on Cooper
                    2014 Granite Crystal WK2 Limited - Nitto Tire: Fueled by Enthusiasts

                    Poontang Pro 300EX 42" - For lawn porpoises
                    OG KOT #4736 Semper Sky Rock Racing/Standardbred Racing Designs 15.5 HP Turbo-Cool Craftsman, 6 Spd w/ crawl box, fat turf treads, Custom paint, and a red onzie

                    Comment

                    • #11
                      Originally posted by Schickos881 View Post
                      Why you need skids? You wheel?
                      Burn....
                      Don't Panic

                      Comment

                      • #12
                        I have a WARN. It does the job. Its bolted to the cross member and unibody
                        I don't always drink orange juice, but when I do, I prefer to chew it. #madpulp

                        Comment

                        • #13
                          Originally posted by ninetysix-ex-jay View Post
                          I have a WARN. It does the job. Its bolted to the cross member and unibody
                          i know yours very well
                          2000 xj 4.5 clayton longarms with wontons with a touch of
                          97' zj
                          2012 surbra imperza DD
                          im a motivation machine like the hammer and sickle in communism

                          Comment

                          • #14
                            Did you get it yet?

                            Im going to be installing the skid from you this weekend if you did.
                            OER The bad judgment Olympics.

                            Lowlife 35x12.5s on 3 inches of lift.
                            General Tires are

                            Comment

                            • #15
                              Yes I did got it the other day
                              2000 xj 4.5 clayton longarms with wontons with a touch of
                              97' zj
                              2012 surbra imperza DD
                              im a motivation machine like the hammer and sickle in communism

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X