Tweet
Should be 297's than for both.
-
Dan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.com -
Get the spicer 760x like the ones in the link I posted.
The 760s are non greasable and have a strong center section compared to the 297. they are both the same size but the 760s are stronger. they cant be serviced But I usually change my u joints once or twice a year anyways if they don't snap.Last edited by justtorchit; 12-13-2012, 09:08 PM.Originally posted by Ktmracer419Comment
-
Pretty sure they stopped making the 297s. Only 760s now.97 XJ.Comment
-
Well than. Guess I gotta get with the times lolololilOriginally posted by Harry View PostOriginally posted by Ktmracer419Comment
-
You haven't bought D30 joints in a while. No shame in that hahaha97 XJ.Comment
-
I wouldn't use anything but Moog (preferable) or Spicer.2000 XJ: "The Black Jeep"MK2 Jetta > M3Chairman of the Chechnyan Space ProgramComment
-
spicer 760s
97 TJ that I think is pretty neat.
Comment
-
ok whats the deal with the full cirlce clips? i have read that they are better?98 xj, 4.0, AW4, 231 AA SYE, 4.5"RE/RC, CA drop brackets, 33s, and some other stuffComment
-
they hold the caps in better.Originally posted by Dirtyjeep92 View Post
just have to grind down a little inside the ear of the shaft.....
im lazy now though and use the c clips. then tack the caps in place
Originally posted by Ktmracer419Comment
-
lol thats what I did. I knew the shafts would be broken long before the u joint ran out of life so i just welded them. Got me home a few times too.Originally posted by justtorchit View Postthey hold the caps in better.
just have to grind down a little inside the ear of the shaft.....
im lazy now though and use the c clips. then tack the caps in placeDan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.comComment
-
hmm. i guess ill have to experiment with this.98 xj, 4.0, AW4, 231 AA SYE, 4.5"RE/RC, CA drop brackets, 33s, and some other stuffComment
-
you can buy spicer joints from Fleet Pride there are a few around.
You will like to know the part number their parts guy suck when it comes to car parts.RCrocs #123 Brown CJ-5
www.offroadcustomcreations.com
Sponsors:
Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal ConceptsComment
-
Where i used to get mine. Part no. is Spicer 5-760xOriginally posted by customcreationsllc View Post
As long as u had the 297 shafts they are a direct fit. About $25 each, i beat the crap outta mine and they never failed me.No worries, I'm not actually back, I'm just reminiscing about the old days.
ForSure Motorsports
Win or Lose, We Booze.
Vice President of Internal Affairs at Dirty Donny's House of HookersComment
Comment