haveing problems with my 98 cherokee. i was hooking up some lights when i touch a wire to i think i box under dash near the pedals, my dumba$$ had the wire connected to the battery. the inline fuse on the wire i was holding blew aswell. now my jeep wont start and the needs on the dash dont work. any suggestions? its a 4.0 aw4 if that helps. my radio works too. checked all fuses inside and under hood and they all check out fine
Announcement
Collapse
No announcement yet.
doesnt start, needles on dash dont work?
Collapse
X
-
doesnt start, needles on dash dont work?
Last edited by Dirtyjeep92; 08-01-2012, 05:07 PM.98 xj, 4.0, AW4, 231 AA SYE, 4.5"RE/RC, CA drop brackets, 33s, and some other stuffTags: None
-
i got an ecm from a buddy of mine. along with ign coil and CPS. and BTW if no body knows this a 2000 ecm wont work on a 98 because in 2000 they changed from distributers to coils. i learned this from a good friend that worked at a jeep dealer ship98 xj, 4.0, AW4, 231 AA SYE, 4.5"RE/RC, CA drop brackets, 33s, and some other stuff
Comment
Comment