2000 xj 4.5 clayton longarms with wontons with a touch of
97' zj
2012 surbra imperza DD
im a motivation machine like the hammer and sickle in communism
all the nessesary upper mounts, lower mounts, coil buckets, and OTK trackbar mount adds up to $376.83 plus the cost of the truss.
total cost= $556.78 from tnt to put that axle under there and thats without shock tabs.
Most anyone is gonna charge you around $200 to cut off all the old stuff, prep the axle, and weld the new stuff on.
Also D44's have the same size u-joint as your dana 30. 9 times out of 10, the u-joint breaks on a dana 30 not the R&P or the splines of the axle shafts themselves.
Waggy axles are also 6 lug, so you need new wheels and adapters for the rear.
IMO money better spent on gears for the axles you have rather than going for dana 44's.
I have one, it's a quality kit. It's expensive to get one all done up like zullo said, but it takes 99% of the work out of the swap. Determine your caster angle and where the lower mounts should be, then burn it home. If you are interested in just the truss alone, I personally would suggest just building your own out of some box tube/plate.
Whether a 44 is a worthwile money pit depends on your plans for the jeep, they have their place.
all the nessesary upper mounts, lower mounts, coil buckets, and OTK trackbar mount adds up to $376.83 plus the cost of the truss.
total cost= $556.78 from tnt to put that axle under there and thats without shock tabs.
Most anyone is gonna charge you around $200 to cut off all the old stuff, prep the axle, and weld the new stuff on.
Also D44's have the same size u-joint as your dana 30. 9 times out of 10, the u-joint breaks on a dana 30 not the R&P or the splines of the axle shafts themselves.
Waggy axles are also 6 lug, so you need new wheels and adapters for the rear.
IMO money better spent on gears for the axles you have rather than going for dana 44's.
im getting a waggy 44 for the rear too and in not going to pay some one to grind perp
and burn it not going otk either
2000 xj 4.5 clayton longarms with wontons with a touch of
97' zj
2012 surbra imperza DD
im a motivation machine like the hammer and sickle in communism
they're hard to follow because im at work most of the times and cant think of a way for it all to make sense i just write what comes to mind at the moment i does
sorry
2000 xj 4.5 clayton longarms with wontons with a touch of
97' zj
2012 surbra imperza DD
im a motivation machine like the hammer and sickle in communism
they're hard to follow because im at work most of the times and cant think of a way for it all to make sense i just write what comes to mind at the moment i does
sorry
Is English your second language? Do they not have punctuation where you came from?
i dont care about punctuation its the fucking internet
2000 xj 4.5 clayton longarms with wontons with a touch of
97' zj
2012 surbra imperza DD
im a motivation machine like the hammer and sickle in communism
Comment