Lightbar! ideas...go!

[Hydra]

what if you do something like this

but just run a bar above the lights, and the lights upsidedown, nothing below

you could probably make it out of some cheap 3/4 bar and it would be plenty strong, or some skinny tubing. would be well protected from shit too

If you did this, then added a big Handturnable fastener on each side, you could just loosen, fold down and then tighten them in the down position too

[Ktmracer419]

If you did this, then added a big Handturnable fastener on each side, you could just loosen, fold down and then tighten them in the down position too

ithinks if i needed moar lights, thats the path I would take

[ninetysix-ex-jay]

Pics of mine:

[SupermanIce-J]

seriously? or are u fawking with me

yes fawking witchoo.

Did you feel that... that was sarcasm slapping you in the face

[ame]http://www.youtube.com/watch?v=mgOXfMKFhy8[/ame]

[AssDomination]

Don't mind the ass domination going on in Jon's pics. I can't help myself.

[HeavyMetal]

Don't mind the ass domination going on in Jon's pics. I can't help myself.

awesome


i think yours jon with a hand tightener of sorts at the cross bar itself so the bar could twist forwards or backwards would be stellar.....

this weekend?

[ninetysix-ex-jay]

awesome


i think yours jon with a hand tightener of sorts at the cross bar itself so the bar could twist forwards or backwards would be stellar.....

this weekend?

No go this weekend. I got in trouble at school so they're making me work 10 extra duty hours this weekend I should be home that week of the meet and greet though. I'll see if I can rig up some of the mounts for my extra duty hours. This is what I have in mind:

http://www.jcroffroad.com/Merchant2/...ry_Code=XJMISC

[HeavyMetal]

ithinks if i needed moar lights, thats the path I would take

still thinkin about this

and we will discuss, jon

[#DEZERTDAD]

hmm





























SHOTS, SHOTS, SHOTS EVERBODAYAAAAAAAAAAAAAAAAAAAAAAAAAAA

[Lawn Guyland]

[XJLI]

i've had my hellas up top for 2+ years and i've left the bolts just loose enough so they move.

never had a problem with limbs as long as i throw the covers on if i know i'll be jungle boogeying.

food for thought.

[HeavyMetal]

maybe ill simplify the whole ordeal and just carry a beast set of clippers haha

[Trailer Ray]

im curious to know how you ran the wires up to the bar??

[HeavyMetal]

im curious to know how you ran the wires up to the bar??

i have a hole drilled in my roof that i sealed with silicone sealant and ran down the a-pillar behind the trim inside and into the dash to the switch

theyre grounded to the safari rack

[Trailer Ray]

ok cool thanks