Replacing stock rockers with 2x6 dookin steel

[Zullock Holmes]

that came out sweet mike! i thought about doing that with mine, cause i kinda dont like the bolt mounting style and with tnt stiffners on the way i was trying to figure out how to work it.

good to see it done though, takes my worries about doing it

[WAD357]

all this makes me want to cut out my perfectly good rockers!

[Mike]

all this makes me want to cut out my perfectly good rockers!

95% of my rockers were rot free. There was just one tiny spot that was rotted and I poked at it and made it bigger and it pissed me off. My drivers side was solid though

[Ktmracer419]

all this makes me want to cut out my perfectly good rockers!

drive to the mainland, find some rocks and dent them

or take all of the rocks on long island and make a pile and drive over that

[WAD357]

drive to the mainland, find some rocks and dent them

or take all of the rocks on long island and make a pile and drive over that

Lmfao im sure they'll be fucked come end of march when i hit rausch for the first time with it....

[Ktmracer419]

yea, tie these in

i came down on a rock (adam has video if he ever puts it up) and now my door takes actual effort to open and close

[Pdwighty]

i came down on a rock and now my door takes actual effort to open and close

^ this happened to me last time out... hopefully il do this sometime this month

[LittleD]

yea, tie these in

i came down on a rock (adam has video if he ever puts it up) and now my door takes actual effort to open and close

Got any pics of how to tie it in? Just looked into doing this project for my jeep and wanna make as few trips to logan as possible

[Even]

Got any pics of how to tie it in? Just looked into doing this project for my jeep and wanna make as few trips to logan as possible

You're going to want to have some sort of uniframe stiffeners, or else the tie-ins won't work very well.

Couple I stole from a build on Pirate. These are high clearance and go through the floor, but you get the idea.

[treadlightly5337]

i love this! mike that thing lined up perfectly. i would love to do this to my rig.

[Hydra]

What Evan posted is exactly what I'm doing, except not through the floor and I'll be throwing skids between the rails

[Mike]

Just throwing this out there, and ill get pics when i go wash the jeep, but ive bounced off these fuckers hard and they are holding up but its starting to bend my floor up.... sorta... very minimal though.

[Ktmracer419]

hence why i said to tie them in

[Mike]

they are sorta tied in but need more I think... Ill get pics

[Burton58]

i'm thinking about doing this to my rockers with my jcr sliders. though maybe running the supports to the frame rail and plating over them, making one big flat skid plate on each side. along with a massive belly skid it should be pretty indestructible. thoughts??