Ranger build

[Toreadorranger]

Front axle:
1986 Jeep Grand Wagoneer Dana 44
4.88 Gears
Aussie Locker
Chevy Flat top Knuckles
Parts-Mike High steer arms

Rear Axle:
Custom Currie 9" housing
Alloy 31 spline Shafts
Full Spool
4.86 Gears

Front suspension:
3 link
14" Fox 2.0 C/O's

Links:
2"x.25" Walled DOM
2-5/8" Super Pivot Joints on both ends, One with a 1.25" adjustable shank

Rear Suspension:
88 2wd Chevy Leafs
Camburg MIG shackles

Tire and wheel:
36"x12.5" bias TSL's
15x8 Black Rockcrawler wheels
GLO DIY 32 bolt beadlocks

The start:


the tear down:


Sitting on the rear suspension:


Ride Height pictures:



Front links:




Coilovers and Coils



Doubler:


Manual BW1354 that will go behind the doubler:


My seats:

[Toreadorranger]

I got both rockers all cut out and the fenders are also all trimmed up.





Sliders, 2x4 3/16th box, the legs are 2x2 3/16th.
Mock up pictures.









Finished sliders.





Frame Plates

[Toreadorranger]

My doubler made my Tcase not fit under the floor. So I fixed the problem.

Started by cutting a nice big old hole in the floor.



I then jacked the back of the trans up as much as possible with out hitting the rest of the trans tunnel. Im just shy of a flat belly on the truck. To get the extra inch I would need I would have to do some really major surgery on the trans tunnel which isnt really worth it.



Next I started patching the floor back up. I used the peices I cut out, just flipped them over.





Not quite finished halfdoor.

[Bigbike]

Looks mad sweet.

[crosbike]

you should lower it. thats what all those ranger guys do it seems





just kidding. does look good tho.

[DrThunder]

Lovin the half door cup holders

[Ktmracer419]

nifty build

nice to see more than just jeeps and cherokees on the forum

[OTTE]

Build looks good so far.

[Henchman]

Freakin shweet. You don't see too many "nice" rangers.


Just curious. What are you doing for a bed?

[XJLI]

hotness. fox shocks <3

[CumminsJeep]

good shit dood looks sweet

[HitItWithSomeSpeed]

Lovin the half door cup holders

those are my only issue with this whole build!

i woulda put them at the front of the door, as to not have to reach back haha.

but then again, im effin lazy.

sick build tho. do want.

[Capt. Crunch]

truck looks dope. good work

[Toreadorranger]

Freakin shweet. You don't see too many "nice" rangers.


Just curious. What are you doing for a bed?

Tube.

[Buffalo Phil]

Sweet build, but at what point do you say 'why even bother having doors'?