Project: Death J

[clean4drxj]

There's a person on Northeastjeep.org selling zj sahfts/parts..

[DizzDizz]

itll take like an afternoon. get to work! chopchop!!

clearly you don't want a nice one then or you can by the flanges then come down here and we can build it for you in a weekend.

[Ruepart Hoaxley]

this is truthy, i need this done soon. i suggest you build a mockup on your xj and bring it back to ct with you on tuesday. GO!!

Worth a shot, dude.

[Lycaon]

clearly you don't want a nice one then or you can by the flanges then come down here and we can build it for you in a weekend.

just the downpipe not the full exhaust, i believe in you!!!!! if its shitty then ill temp it

[Lycaon]

swapped the vac gauge from the dash to the pod and popped in the aem wideband gauge in its place. things are slowly but steadily heading towards the sc install

[DizzDizz]

swapped the vac gauge from the dash to the pod and popped in the aem wideband gauge in its place. things are slowly but steadily heading towards the sc install

is that my pod on the pillar?

[Lycaon]

is that my pod on the pillar?

indeed sir

[Ruepart Hoaxley]

Gauges don't make burnouts.




Coming together finally.

[Lycaon]

Gauges don't make burnouts.

find me an early v8 zj driveshaft and a day of your time and lets get this shit going brah!

[Ruepart Hoaxley]

find me an early v8 zj driveshaft and a day of your time and lets get this shit going brah!

Or, for the fourth time... fucking TRY MINE

Chuck and Eddie's is open until 5...

[DizzDizz]

Or, for the fourth time... fucking TRY MINE

Chuck and Eddie's is open until 5...

YOURS WONT WORK lol. and chuck and eddies are crooks best bet is harrys u pull it in pa. im like an hour from them.

[Lycaon]

Arite auto parts has one for a bill

[Lycaon]

guess who's back, back again

[DizzDizz]

OH BOY OH BOY OH BOY.

[Lycaon]

xj had its first few drives this past weekend on the new reggy, first time in months its been out on the road. and in addition to the rear drivers eldo caliper being frozen for a long time, my front drivers WJ caliper decided it wanted to lock up too, so im driving around universal drive in north haven with only my passenger side brakes functioning and the front lh wheel making quite the smokeshow... so i went out and got both new wj calipers and pads under warranty and bought a new set of monte carlo calipers to replace the rusted busted eldo calipers, painted em up and baked them, popped em on, pulled out my ebrake cables, now i just gotta finish bleeding them after work and ill have fully functioning brakes on all four corners for the first time in over a year

oh and a new optima yellowtop ftw