Project: Death J

[DizzDizz]

when you gonna wheel this thing

[Lycaon]

ive been busy insulating the office trailer and replacing the strut on donnys moms car, bill has been in buffalo all week, his truck was just washed after vin raptor lined the bed so dont you worry about me

[DizzDizz]

Still need roughly 900 bucks worth of electronics and such before its runable

get to work then i know stews truck is dirty bills is probably as well. if you make vinny mad it aint pretty ok babe. WHAT THE FUCK lol miss jarvis creek

[Lycaon]

36lb

[HitItWithSomeSpeed]

What injectors are you gonna run?

[Lycaon]

get to work, let me know how it goes so I can copy you.

Still need roughly 900 bucks worth of electronics and such before its runable

[HitItWithSomeSpeed]

Indeed it is sir

get to work, let me know how it goes so I can copy you.

[Lycaon]

The tb is 63mm thru-bore from leigh performance

[clean4drxj]

btw I like the sunroof idea and have been thinking about it with mine but my ac works awsome still.

[clean4drxj]

No I installed itoriginally with the head on and snapped a tab off for the alignment dowel and it was leaking and idling high so when I redid and installed my old head I bench assembled the intake/exhaust to make sure it all lined up but I never had to clearance anything

hmm .. when I assemble mine the samething happened and it's been good But I've read one naxja that with the apn and the newer intake, the intake needs a tiny bit of clearancing, is that tb a 62mm or was it just the bottom just opened up?

[Lycaon]

Is that a 3.8 M90 I see?

Indeed it is sir

[Lycaon]

No I installed itoriginally with the head on and snapped a tab off for the alignment dowel and it was leaking and idling high so when I redid and installed my old head I bench assembled the intake/exhaust to make sure it all lined up but I never had to clearance anything

[HitItWithSomeSpeed]

Is that a 3.8 M90 I see?

[clean4drxj]

looking good Zack, did you have to trim the bottom of the intake for the APN? it's something I wish I did on mine and will do once I take the engine apart for other mods.

[Lycaon]

so its been nearly 2 years since ive updated this thread, so i figure ill just slap in pics of mods and try to keep it in some sort of order:

light bar:


ballistic fab track bar mount:


front bumper, couldnt find pics of the rear but its jcr as well





engine stuffs:









wj brakes:






sun roof:





OD console trim, zj shifter handle, and new seats with headrests and power drivers seat:






MAP signal adjuster:




Dual Exhaust:






some prep for future endeavors:
clutch pedal installed

a/c bypass pulley installed











































































and then of course theres the mystical box of goodies: