Announcement
Collapse
No announcement yet.
My green Xj
Collapse
X
-
they are poop josh, total poop.
they need new bushing and are coming apart, they are almost 3 year old rustys leaf springs, that need to die. very soon.
Leave a comment:
-
Are the leafs shot or just well broken in???
if just well broken in can I haz dibs??
Leave a comment:
-
New rear bumpstops have been put in and towers were fabbed up for em. They worked great, pics eventually.
And Well after Rausch Creek this weekend........
I need.....
a 44 yoke, and a new rear driveshaft
an sye or alot of RTV lol..... or god knows maybe a new tcase, too early to tell
all new tie rod ends
new leaf springs, that net more than an inch of lift
front and rear shocks
ohhh and a driver side mirror
Leave a comment:
-
Thats not how they're supposed to work?Originally posted by JeepBabiiXJ View Postwell using shocks as bumpstops is overrated too, cause all they do is piss shock oil everywhere
Leave a comment:
-
well using shocks as bumpstops is overrated too, cause all they do is piss shock oil everywhere
Leave a comment:
-
Bump stops are over ratedOriginally posted by JeepBabiiXJ View Postlol i mean the front shocks were partially my fault, they are rears for 4 inches of lift, when i installed them they actually would have been perfect if i had bumpstops..... they had like 3 inches of uptravel and insane amount of downtravel... ehh ohhh fucking well.
Leave a comment:
-
lol i mean the front shocks were partially my fault, they are rears for 4 inches of lift, when i installed them they actually would have been perfect if i had bumpstops..... they had like 3 inches of uptravel and insane amount of downtravel... ehh ohhh fucking well.
Leave a comment:
-
Damn man sorry to hear that.Originally posted by JeepBabiiXJ View Postonly in my world......
can i install "new shocks" and do all kinds of cool stuff...
then go rip for 15 minutes and blow up both shocks, make my oil leak at a higher rate, and snap a grease fitting off a TRE how random is that shit.
Leave a comment:
-
only in my world......
can i install "new shocks" and do all kinds of cool stuff...
then go rip for 15 minutes and blow up both shocks, make my oil leak at a higher rate, and snap a grease fitting off a TRE how random is that shit.
Leave a comment:
-
agreed. i'd give it a shotOriginally posted by greenxj513 View Postyeaaa i think it'll be fine, i really don't think i need to build a 60 for 35's.
i would entertain this idea, but with the 35's i'm content with what i got.Originally posted by Even View PostKeeping the 30spl. inners?
Way down the road I may contemplate going to a 44/60 hybrid w/ 35spl stuff. Obviously a 609 would be the shit, but If I already have a hp44 I don't see a reason not to try it. I doubt I'll ever see bigger than a 36-37" tire on this jeep.
ARB makes a 35 spl locker, Ballistic is in the process of making bombproof balljoints, Reid knuckles, etc.
Leave a comment:
-
i think i'm gonna keep it 30 spl, it all depends on the money i have to dump into it.
If i come across the cash for an ARB, i will go that route, run 35 spline shafts and just ditch the spool, which i really don't wanna run in the first place.
Leave a comment:
-
Keeping the 30spl. inners?Originally posted by greenxj513 View Postchromo'ed hp 44 with 4.56's and ford outers.
that's my summa project
Way down the road I may contemplate going to a 44/60 hybrid w/ 35spl stuff. Obviously a 609 would be the shit, but If I already have a hp44 I don't see a reason not to try it. I doubt I'll ever see bigger than a 36-37" tire on this jeep.
ARB makes a 35 spl locker, Ballistic is in the process of making bombproof balljoints, Reid knuckles, etc.
Leave a comment:
-
yeaaa i think it'll be fine, i really don't think i need to build a 60 for 35's, esp when at this point the only thing i need to start building the 44 is steel for the tubes and shafts.Originally posted by Ktmracer419 View Postnot sure. but with the good shafts in my junk at b2 on one of the rcrocs i was in reverse in the bowls with my rear tires in the air and rear bumper sliding up shit. the whole time i was doing that i was waiting for a boom. but it held up fine and dandy.
Leave a comment:
Leave a comment: