Tweet
Alright guys, no one here has really seen the new rig.
Heres how it started, got her on December 27th 2007. Decided to sell all the stuff off the other jeep to pay for a Stoker build to drop into this and run it stock.
I had installed a Magnaflow high flow 2.5" cat, with a 2.5" Super 40 Flowmaster and also the 2.5" tailpipe. Got me some bling wheels and some 30x9.5R15 BFG AT's. Also put on my bumper from the other truck that I didnt want to sell.
11 Months later there was no stroker in sight and I found these in the back room..
Anyways, here is where I am now.
Today I installed my lockers, so im wiped but I figured I would post some pics of it since its pretty much done..
Heres what its got.
D30
4.56
Aussie Locker
Ruff stuff Cover
Banditt One Ton Steering
Chrysler 8.25 29 Spline
4.56
Aussie Locker
Disk Brakes (ZJ proportioning valve)
Ruff Stuff Cover
Truck
97 XJ
4.0L
AW4
231 with SYE
35x12.5R15 KM2's
Cragar V5's 3.75" BS
Re Trac Bar with the HD bracket and the Bracket Unibody brace
4.5" RE Superflex Kit
Interior
Kicker CVX 15" DVC Sub 2.2Cube Sealed Box
Kicker ZX1000.1 Amp
Kicker 4G Cables
Kicker KS25's at all 4 corners
Premier 690-UB Deck with 80GB Hard Drive
Radar Dectector and GPS
Armor
AJ's Super Sliders
Warn T-Case Skid
Ruff Stuff Covers
JCR Front Prerunner Bumper with Tie ins
ZJ Tank Skid (To be installed)
Hidden Hitch (To be installed)
I have a 99+ intake sitting here an an APN header waiting to be installed, bought them in January 08 and they have been sitting in my closet since.
Heres how it started, got her on December 27th 2007. Decided to sell all the stuff off the other jeep to pay for a Stoker build to drop into this and run it stock.
I had installed a Magnaflow high flow 2.5" cat, with a 2.5" Super 40 Flowmaster and also the 2.5" tailpipe. Got me some bling wheels and some 30x9.5R15 BFG AT's. Also put on my bumper from the other truck that I didnt want to sell.
11 Months later there was no stroker in sight and I found these in the back room..
Anyways, here is where I am now.
Today I installed my lockers, so im wiped but I figured I would post some pics of it since its pretty much done..
Heres what its got.
D30
4.56
Aussie Locker
Ruff stuff Cover
Banditt One Ton Steering
Chrysler 8.25 29 Spline
4.56
Aussie Locker
Disk Brakes (ZJ proportioning valve)
Ruff Stuff Cover
Truck
97 XJ
4.0L
AW4
231 with SYE
35x12.5R15 KM2's
Cragar V5's 3.75" BS
Re Trac Bar with the HD bracket and the Bracket Unibody brace
4.5" RE Superflex Kit
Interior
Kicker CVX 15" DVC Sub 2.2Cube Sealed Box
Kicker ZX1000.1 Amp
Kicker 4G Cables
Kicker KS25's at all 4 corners
Premier 690-UB Deck with 80GB Hard Drive
Radar Dectector and GPS
Armor
AJ's Super Sliders
Warn T-Case Skid
Ruff Stuff Covers
JCR Front Prerunner Bumper with Tie ins
ZJ Tank Skid (To be installed)
Hidden Hitch (To be installed)
I have a 99+ intake sitting here an an APN header waiting to be installed, bought them in January 08 and they have been sitting in my closet since.
Comment