Announcement

Collapse
No announcement yet.

Jeep, and other parts (cleaning up)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jeep, and other parts (cleaning up)

    I have a lot of crap in my basement.

    96 XJ 4 doors black beat up pretty good glass is still good.
    Has power locks and windows I know the windows all worked.
    Some parts missing no mirrors.
    My brother swapped them out for a better set I had.
    Free to good home, beer would be welcomed.

    96 XJ 4dr rear windows. $10

    I have power mirrors 96 XJ $10 each

    Black tailgate 96 XJ paint faded $40

    Black right front fender 96 XJ $20

    96XJ front springs $20

    AW4 and 231 from older XJ around 89 they are 21 spline $150 for both

    27 spline 8.25 shafts $10 each

    97up XJ driver front side marker light new $10

    I've had them for a year taking up space just want them gone.

    96 XJ complete engine wiring harness reduced to only what needs to make it run and labeled with computer and fuse box I also printed out the pin lay out.
    You just need sensor and a 96XJ intake manifold to make it run.
    $50


    Some other things I've been trying to get rid of.

    YJ/CJ revolver shackles 2 sets $100 each
    YJ/CJ Z-boxes 2 sets $100 each

    03 CR 125 motor complete $600

    Holley Projection throttle body fuel injection for V8 simple tuning just turn the mixture screws, its the newer digital style 650CFM with O2 sensor $600
    OEM Chevy HEI distributor $20


    Propane kit 420 carb with quadrajet throttle adapter, and model E regulator and all the parts to use it, 2 older tanks and tank bracket. $500

    YJ front right fender new replacement $80

    YJ windshield frame no glass black 2X $50

    16.5X(8 or 10 cannot remember) 8 lug 4 rims $100

    Stock ford Dana 60 87-98 inner shafts 2 sets $40 each

    Stock dana 30 outer disconnect shaft 2 for $10

    CJ rear seat black compartment underneath $20

    YJ/CJ seat brackets I have a few passengers. $20


    Standard transmission out of around 89 F350 axle was kingpin don't know what it is has PTO cover. $100 can take picture if interested. No bell.

    2 turbo 350 $100 each

    NP205 bolts to turbo 350 $100 has slip yoke.
    Divorced NP205 $300

    CJ hard top no rear window $50
    CJ hard doors solid but windows frozen $40 I'll throw in extra glass and window mechanism

    CJ-5 soft top pretty good condition $100 black wit doors hoop etc.
    soft top hoops $10 have 3 CJ, 1 YJ CJ has a double hoop YJ has some extra bars.

    CJ grill $40
    CJ fender right front $40
    CJ power steering boxes I have like 3 of them $40 each
    CJ hood small dent $40 needs paint
    CJ plastic 20 gallon tank $40

    Bell housing to Chevy to Ford (Stock CJ 4 cylinder with iron duke)
    So if you want to put a Chevy in an older jeep with like a T-18 $100

    AX-15 Bell housing external slave setup $80 bell fork and trany cover.

    Summit racing 37º flaring tool $20 used once bought hydraulic flare 37º adapters.

    I cannot remember what other crap I have just trying to clean up.
    Last edited by customcreationsllc; 08-18-2010, 08:44 AM.
    RCrocs #123 Brown CJ-5
    www.offroadcustomcreations.com

    Sponsors:
    Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal Concepts

  • #2
    Is the hatch still availible?
    do you have controls for mirrors?

    Comment


    • #3
      Originally posted by customcreationsllc View Post
      I have a lot of crap in my basement.

      Standard transmission out of around 89 F350 axle was kingpin don't know what it is has PTO cover. $100 can take picture if interested. No bell.

      CJ power steering boxes I have like 3 of them $40 each

      Bell housing to Chevy to Ford (Stock CJ 4 cylinder with iron duke)
      So if you want to put a Chevy in an older jeep with like a T-18 $100
      Interested in these, is that trans a 4 speed? if you could snap a pic that would be cool. I won't really be around until Sept 1st or so. Maybe I'll see you in PA.
      1950 Willys Trail Rig
      2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4

      Comment


      • #4
        Originally posted by icedragon View Post
        Is the hatch still availible?
        do you have controls for mirrors?
        Yes still available

        I'll have to check on the controls for the mirrors they are probably still on the doors.
        RCrocs #123 Brown CJ-5
        www.offroadcustomcreations.com

        Sponsors:
        Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal Concepts

        Comment


        • #5
          Originally posted by OWEN View Post
          Interested in these, is that trans a 4 speed? if you could snap a pic that would be cool. I won't really be around until Sept 1st or so. Maybe I'll see you in PA.
          I'll take a picture.
          I can bring it to Rausch.
          You want me to bring the Bell to Rausch?

          A couple of the steering boxes are different, different input splines.
          I can take a pictures of those too.
          RCrocs #123 Brown CJ-5
          www.offroadcustomcreations.com

          Sponsors:
          Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal Concepts

          Comment


          • #6
            a buddy of mine is buyin that CJ i have posted so it seems, so if he does.. he'll buy that CJ tank from ya.

            Comment


            • #7
              Originally posted by customcreationsllc View Post
              I'll take a picture.
              I can bring it to Rausch.
              You want me to bring the Bell to Rausch?

              A couple of the steering boxes are different, different input splines.
              I can take a pictures of those too.
              Cool, I guess I should figure out what input spline my box has. I know it uses SAE 7/16 bolts (not metric)

              Don't worry about hauling that stuff down if you don't want to, I know that can be a pain. I am looking for a spare trans to rebuild, so I am in no hurry. As for the bellhousing it sounds cool and interesting but also no in a rush. I'll see you there!
              1950 Willys Trail Rig
              2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4

              Comment


              • #8
                Originally posted by clean4drxj View Post
                a buddy of mine is buyin that CJ i have posted so it seems, so if he does.. he'll buy that CJ tank from ya.
                Cool thanks
                RCrocs #123 Brown CJ-5
                www.offroadcustomcreations.com

                Sponsors:
                Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal Concepts

                Comment


                • #9
                  CJ/YJ steering boxes.




                  Hatch a little faded wiper missing.



                  Name this tranny Ford with PTO I think I counted 31 splines
                  Hint I think it came out of a 89 F350 with a 460






                  This might be the bell housing.
                  Last edited by customcreationsllc; 08-19-2010, 08:43 AM.
                  RCrocs #123 Brown CJ-5
                  www.offroadcustomcreations.com

                  Sponsors:
                  Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal Concepts

                  Comment


                  • #10
                    Justin, it looks like a T18 or T19, If it just has a PTO cover on the pass side its a T18, if both sides its a T19. Not really what I am looking for (not what I have now) but thanks for taking a pic. That bellhousing doesn't look like it will bolt to a chevy engine
                    1950 Willys Trail Rig
                    2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4

                    Comment


                    • #11
                      I didn't take a picture of the chevy bell. Sorry.

                      That bell I think when to the T18, PTO only on pass side. I think the bell is for a ford 460.


                      The Chevy/ford bell I'm talking about came out of my CJ5 with the Iron duke.
                      That is the OEM adapter bell for chevy engine to ford transmission.


                      from 81-83 jeep used the 4cly iron duke engine it had a chevy 90* bell housing and the jeep transmission which uses the ford tranny bolt pattern.

                      It is still connected to a 4spd I'll give you the bell and clutch fork.
                      Do you want the tranny? not sure what it is. left and up for reverse all aluminum. I just like taking the output shafts so I can make divorced yoke build mini buggy

                      Do you want me to bring it to rausch?

                      I will never put it back in my CJ. I did use it for on comp.
                      I have a 304 in my CJ7 some day I might build a CJ with a chevy but no time soon figure sell it I can buy some buggy parts.
                      RCrocs #123 Brown CJ-5
                      www.offroadcustomcreations.com

                      Sponsors:
                      Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal Concepts

                      Comment


                      • #12
                        hey do u have any stock 60 covers layin around??

                        also i need to talk to you about that np205. hit me up later today when u see this.
                        No worries, I'm not actually back, I'm just reminiscing about the old days.


                        ForSure Motorsports
                        Win or Lose, We Booze.


                        Vice President of Internal Affairs at Dirty Donny's House of Hookers

                        Comment


                        • #13
                          I might have a stock 60 cover I'll take a look I know I've given some away.

                          I'm going to the jeep rally I can bring the parts there if you like.
                          RCrocs #123 Brown CJ-5
                          www.offroadcustomcreations.com

                          Sponsors:
                          Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal Concepts

                          Comment

                          Working...
                          X