Announcement

Collapse
No announcement yet.

Front and Rear Toyota Axles

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Front and Rear Toyota Axles

    Front Axle:

    1985 housing:

    -rebuilt locking hubs, wheel hubs and steering knuckles
    -welded on 3/8 diff. armor
    -1.5" 6061 T6 Al wheel spacers to match rear axle
    -FJ vented rotors
    -V6 4 piston calipers with new pads
    -extended braided SS brake lines
    -4 cylinder L/P front 3rd member open with 4.10's
    -stock inner axleshafts with upgraded Marfield birfield joints
    -Complete Marlin Crawler Histeer Crossover Steering with billet chromoly steering arms, 1.25" x 0.250" wall DOM tie rod and drag link, FJ-80 TRE's, and a 1 piece pitman arm.
    -cleaned, primed and painted black

    0 miles on axle since rebuild

    $1000





    Rear Axle:

    1994 housing:

    -V6 4.10 open 3rd member
    -stock 30 spline axleshafts
    -fully rebuilt with new seals and all new bearings
    -rebuilt drum brakes with turned drums, new shoes and springs
    -cleaned, primed, and painted black

    0 miles on axle since rebuild

    $300

    Last edited by Danksters; 02-01-2010, 01:01 PM.
    You're a ___________

  • #2
    do you have any empty rear toyota housings?

    Comment


    • #3
      no
      1996 xj, waggy 44 front 5.13 gears aussie trussed, 3 links, 3.5" coils, spooled 8.8 rear, 38" tsl sx's, tnt front bumper, jesus freaks rear bumper, Olympic top hat roof rack, bunch of dumb shit
      2001 wj tbd
      1974 5 ton

      Comment


      • #4
        Originally posted by Cletus View Post
        no
        What he said.
        You're a ___________

        Comment


        • #5
          thats an insane amount of money for an open front yota axle with 4:10's
          "when I'm riding my motorcycle,I'm glad to be alive...when I stop riding my motorcycle,I'm glad to be alive"

          Comment


          • #6
            can i ask why you are not going to use them in the build? or is the build no more...?
            #becauseJoeNitro

            Comment


            • #7
              wonton
              1996 xj, waggy 44 front 5.13 gears aussie trussed, 3 links, 3.5" coils, spooled 8.8 rear, 38" tsl sx's, tnt front bumper, jesus freaks rear bumper, Olympic top hat roof rack, bunch of dumb shit
              2001 wj tbd
              1974 5 ton

              Comment


              • #8
                You should post these on www.ttora.com, price is a bit steep though
                HOONIGAN FOR LIFE
                OLD 4X4'S NEVER DIE!!!!!

                Comment


                • #9
                  Hi steer- $450
                  Knuckle rebuild kit with bearings-$150
                  new 4 piston v6 calipers, pads and rotors-$300
                  Marfield birfield joints-$200
                  wheel spacers-$80
                  rebuilt aisin hubs-100

                  So thats 1280 in new parts, plus the open 3rd member, and the axle itself. Everything was totally cleaned and rebuilt and has never been driven since the rebuild. It is totally rust free and was properly cleaned and painted. All that's missing is a locker to have a built Toyota front axle with steering.

                  Or make me an offer.
                  You're a ___________

                  Comment


                  • #10
                    Price drop. The front axle WITH steering is $1000 and the matching rear axle is $300. My loss is your gain.
                    You're a ___________

                    Comment

                    Working...
                    X