Front and Rear Toyota Axles

[Danksters]

Front Axle:

1985 housing:

-rebuilt locking hubs, wheel hubs and steering knuckles
-welded on 3/8 diff. armor
-1.5" 6061 T6 Al wheel spacers to match rear axle
-FJ vented rotors
-V6 4 piston calipers with new pads
-extended braided SS brake lines
-4 cylinder L/P front 3rd member open with 4.10's
-stock inner axleshafts with upgraded Marfield birfield joints
-Complete Marlin Crawler Histeer Crossover Steering with billet chromoly steering arms, 1.25" x 0.250" wall DOM tie rod and drag link, FJ-80 TRE's, and a 1 piece pitman arm.
-cleaned, primed and painted black

0 miles on axle since rebuild

$1000





Rear Axle:

1994 housing:

-V6 4.10 open 3rd member
-stock 30 spline axleshafts
-fully rebuilt with new seals and all new bearings
-rebuilt drum brakes with turned drums, new shoes and springs
-cleaned, primed, and painted black

0 miles on axle since rebuild

$300

[4bangeryj]

do you have any empty rear toyota housings?

[Magilla]

no

[Danksters]

no

What he said.

[grundlepunch]

thats an insane amount of money for an open front yota axle with 4:10's

[JoeNitro]

can i ask why you are not going to use them in the build? or is the build no more...?

[Magilla]

wonton

[#DEZERTDAD]

You should post these on www.ttora.com, price is a bit steep though

[Danksters]

Hi steer- $450
Knuckle rebuild kit with bearings-$150
new 4 piston v6 calipers, pads and rotors-$300
Marfield birfield joints-$200
wheel spacers-$80
rebuilt aisin hubs-100

So thats 1280 in new parts, plus the open 3rd member, and the axle itself. Everything was totally cleaned and rebuilt and has never been driven since the rebuild. It is totally rust free and was properly cleaned and painted. All that's missing is a locker to have a built Toyota front axle with steering.

Or make me an offer.

[Danksters]

Price drop. The front axle WITH steering is $1000 and the matching rear axle is $300. My loss is your gain.