aw4 and some other shit

[blazerguy912]

Got my Aw4 out from the swap if anyone needs one. $80 OBO?
Shifter, shift knob, brackets for np231 shifter. Also have those two random cables from the shifter, the steering wheel lock and the throttle body connection that runs to the transmission. Stock rear driveshaft from that tranny to the 8.25. Good ujoint. All BO

Problem is, I think I might have broken the air breather that goes right into the hole near the pan. Also, I cut the wires for the NSS and I don't remember how long I left them. I'd have to check on that. Shifted fine, sometimes it would once in a while randomly Slip for a quick second when I shifted from P to D. SO it can probably use a flush or something. Only had 114K on it when it was pulled.

Also have a used flywheel for a manual transmission, fits for cherokees (might be year specific) and I know wranglers as well. Good shape, $30 can take it.

Let me know if you may be interested in any of this.

Also, if you would happen to possibly have a manual ecu for a 2000, please let me know. 2001 might work too.

[blazerguy912]

bump. anyone? need this shit gone and I could use some cash right now.

[Ruepart Hoaxley]

Still have the NSS from this tranny?


Sent from my pay phone in Chechnya

[blazerguy912]

I do, but I cut the wires kind of close to the NSS, in case you were still wondering. Sorry for the late response, haven't been on here in a while.

[Ruepart Hoaxley]

How close? close enough I can still solder it into my existing harness?

[wrpoole]

How many miles in aw4

[XJcrazy00]

the AW4 has just about 110K, just getting warmed up.

I think the NSS wires were cut about an inch or two past the switch IIRC, I'm sure a solder job is possible. Even if there is half an inch left you should be able to solder a connection, right?

[Burton58]

I need the 4wd shifter lever and brackets. I'm swapping a 2wd xj. Can you box it and ship it on my dime?

[Ruepart Hoaxley]

the AW4 has just about 110K, just getting warmed up.

I think the NSS wires were cut about an inch or two past the switch IIRC, I'm sure a solder job is possible. Even if there is half an inch left you should be able to solder a connection, right?

Yes. I can has?


Sent from my pay phone in Chechnya

[blazerguy912]

Yes. I can has?


Sent from my pay phone in Chechnya

Its really short, I checked. I am pretty sure it wont work cuz im an idiot and didnt think before I did it. Ill post up a pic tmrw of how it looks..

[blazerguy912]

I need the 4wd shifter lever and brackets. I'm swapping a 2wd xj. Can you box it and ship it on my dime?

You mean the lever Inside the jeep? Or the rods that connect the lever to the shifter on the tc? Because I only have the rods and brackets. I didnt take off the bracket in the tunnel though. I think I tried and a nut wasnt coming off but I can try again if u really want it.

[blazerguy912]

Forgot to mention that I have the brake pedal assembly from my 2000 Cherokee, auto flywheel, auto tranny mount and bracket, starter from a 97 grand Cherokee 6cyl, a non-beat up tranny support, and torque. Converter for sale.

I just realized how I worded my initial post. The shifter and shift knob is for the auto tranny, not the tc. Sorry. One of the cables connecting from the tranny to the tb has the broken piece on the tb side so its probably not usable. The other cable which I think is from the pedal to tb has a slightly broken end bcuz I feel like it will stay on. I will try it out on my jeep before I give a def thumbs up on that one too. I also figured out that I cut a few wires that are on the back drivers side of the tranny. There r in a black grommet and I cut em all..I have no idea what those r for either. I have that harness for that switch tho..soIf u have that same connection, ill give u the harness free to soldier it on if that makes things duable.

I think that just about covers everything I have

[wrpoole]

I will take the aw4 if you still have it

[Burton58]

You mean the lever Inside the jeep? Or the rods that connect the lever to the shifter on the tc? Because I only have the rods and brackets. I didnt take off the bracket in the tunnel though. I think I tried and a nut wasnt coming off but I can try again if u really want it.

yeah i mean the physical shifter from inside that bolts to the tunnel. i'm swapping a 2wd and don't wanna go underneath to put it in 4wd

[Ruepart Hoaxley]

Its really short, I checked. I am pretty sure it wont work cuz im an idiot and didnt think before I did it. Ill post up a pic tmrw of how it looks..

bump?