Some stock parts

[WickedXJ]

Posting this over from my Craigslist as well. I tried to sell this stuff already and had a lot of interest on here but no one from here acutally followed though and picked anything up so it needs to go cause I am moving out for school.
THIS WILL ALL BE RECYCLED ON MONDAY 8/8 IF NO ONE IS INTERESTED IN PURCHASING ANY OF IT. I will hold parts after Monday just make sure you contact me to make sure I hold it for you before Monday.
Most of it I can vouch for the condition but some of it I honestly have no idea. I tried to get a good amount of picture but if you don't see anything feel free to ask. Prices are slightly negotiable but I priced this out a couple dollars over what I would get if I recycled it so don't expect to offer me half what I am asking and walk away with a part.

8.25" 27 spline 3.07 gears less than 100 miles on complete overhaul!!!!!! Perfect axle, with 0 problems and 90% new parts I got it completely professionally repaired then upgraded to a bigger axle a couple months later. I just really want to see this go to a good home and not a scrap yard so price is negotiable. Some small drum brake parts are missing. $30

Dana 35 All mounts and most parts gone use for brakes, shafts, housing, or 3.55 pinion gear. $10

Random interior parts from open 35 3.55, 44 unknown ratio mostly gone from exploded factory LSD, 30 3.07 everything in good shape. $25 for all

Fuel rail $10

Intake manifold $10

Exhaust manifold $10

Drum and disk brake parts including 4 roters and some drums. $10

Brake booster with BMC and resivour (unknown condition) $5

2 sets of stock control arms $10 for a set

2 coil springs $5 ea.

Stock casette radio(unknown condition) $5

Mechanical fan(unknown condition) $5

Stock tie rod with stabilizer TRE's are fairly bad but great for a spare. $5

Hub with dust cover stuck together $5

Dust cover by itself $2

Stock air dam(this saves you mpg) $1

Chrome Grille $4

Chrome Headlight bezels $2 ea.

Electric fan $25

Chrome 2 roof rails $15

6ft plow. $75

Mount and hydraulics for a plow that was custom built for a 1987 XJ. $40

A perfect condition bike rack that straps onto a hatch or trunk and holds 3 bikes. Great thing but got one for trailer hitch so it isn't needed anymore.$25

Call, text, or e-mail. My number is 860-575-4601 I prefer texts and prefer being contacted between 10 am and 2 am.

[Ruepart Hoaxley]

pics of plow mounts

[DizzDizz]

if the grill and bezels are from a 96 down i'll take em next time im in ct

[Pat]

Would the aw4 fit in a 98+ ?

[clean4drxj]

iI believe there to be a few things that differ from that of a 90(electical parts and spline count).

[clean4drxj]

if that 8.25 was 3.55's I would suck that up in a second

[Ruepart Hoaxley]

Dibs on D30, let me know when I can come pick it up.

[WickedXJ]

It looks fine and supposedly worked when pulled but the solenoid and up and down switch have gone missing as well as a couple supports that go from the bottom to the frame but hey for $40 do with it what you will, they don't even make these commercially.

if the grill and bezels are from a 96 down i'll take em next time im in ct

They are from a 1990 so I'm going to say yes.

Would the aw4 fit in a 98+ ?

I don't think it will because the tag said 89 on the t-case it is mated to and I believe it said 21 spline which is different from the 91+ 23 spline.

if that 8.25 was 3.55's I would suck that up in a second

I know and it pisses me off that I barely give it away when I just put $500 into it before I pulled it a few months later, I just had to match my stock front gearing.

Dibs on D30, let me know when I can come pick it up.

Just to be clear you did read the "VDC" part it is a vacuum disconnect. It is missing the unit bearings, stub shafts, the drivers side axle shaft. If you still want it I am around the area until the 24th and have plans this weekend but other than that I don't have any solid commitments for this week or until Thursday of next.

[Ruepart Hoaxley]

Just to be clear you did read the "VDC" part it is a vacuum disconnect. It is missing the unit bearings, stub shafts, the drivers side axle shaft. If you still want it I am around the area until the 24th and have plans this weekend but other than that I don't have any solid commitments for this week or until Thursday of next.

I know it's VDC, that's why I want it. As long as the gears, carrier, and housing are fine it's all good. I'll let the kid know.

[DizzDizz]

ya i'll take those gbrill pieces mine are all broken god damn wharton state forest kills these things

[WickedXJ]

I know it's VDC, that's why I want it. As long as the gears, carrier, and housing are fine it's all good. I'll let the kid know.

sorry man I just let the 30 go to someone who offered me more than I was even asking and who showed up today. Sorry. Also the leaf springs are pending sale as is the plow and mount.

[Ruepart Hoaxley]

So much for dibs.

[WickedXJ]

So much for dibs.

Sorry man. SO transmission sold, t-case sold, and all leafs sold, everything else I edited as well.

[hoggie101]

ill take the fan if works

[WickedXJ]

ill take the fan if works

Ill let you know I if it does but im pretty damn sure it does. I'll check it tomorrow of Monday.