Grand cherokee part out

[1cleantj]

so picked up an XJ , using motor of my ZJ for xj, what's listed below is available as parts.

everything is from a current running and driving ZJ, the ZJ suffered unibody dmg from rear end impact so its been off the road since. Been using it around the yard.




Whats available -

front fenders, one side has clear coat flaking
doors
Interior panels/switch's
Transfercase all time AWD 4lo/4hi work great
Dana35 rear end 3.55 gears setup for coil springs
dana30 front axle with brand new CV-shafts (napa, not cheap ones).
Rims
Driveshafts
Rear seat
most stuff from engine bay beside's radiator ,starter, motor
Auto transmission with new torque converter, less then 1yr old. everything works great, shifts good
tail lights

driver/pass seat may be available also.

i may have missed stuff, if your looking for something just let me know.

[wrpoole]

how many miles on the tranny

[MdgtRac]

is the rear seat a 60/40 seat? if so color and how much?

[1cleantj]

how many miles on the tranny

around 150k its been kept up good, torque converter is only new because when I swapped motor's I forgot to grab torque converter from original engine before junking it, the new motor i put in had a different auto tranny behind it, resulting in a different torque converter so i had no choice but to get a new one

[1cleantj]

is the rear seat a 60/40 seat? if so color and how much?

yes 60/40 nice a plush grey in color $50 for all of it

best pic i have is when i gutted the interior. seat is been stored in the jeep, hasnt got went or anything. you can see one bottom behind my toolbag in the pic, along with the backs and the other side there also

[Ruepart Hoaxley]

possibly part with the disc setup from the 35?

[1cleantj]

possibly part with the disc setup from the 35?

going to try to sell axles complete before parting them

[ftrndyrsox]

how much for the tail lites? you possible wanna sell the 5 star rims?

[1cleantj]

chec ur pm's

[VDubLuv82]

FRONT DRIVE SHAFT IN GOOD SHAPE?

[1cleantj]

FRONT DRIVE SHAFT IN GOOD SHAPE?

as far as i know, this jeep has never been wheeled, been driven by my mother. I havent physically checked it out but they had the front cv-axle shafts and a unibearing replaced last year at a shop and vehicle checked out good.

[VDubLuv82]

what do you want for the front drive shaft? I'm trying to get my jeep back together and want my sye in but the drive shaft i got to do it, isn't lookin so hot now

[1cleantj]

check pm's

[1cleantj]

]

[1cleantj]

overhead console

if your good with wiring you could make it functional with an XJ. I can include wire connectors with like 8" of wire on it still to make splicing/wiring easier

$40