Announcement

Collapse
No announcement yet.

Hydro Assist Setup FEELER

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Hydro Assist Setup FEELER

    I bought the some of the setup from Greg at Banditt Offroad. Everything else I have made or supplied.

    -Drilled and tapped box with fittings (from a Jeep Wrangler YJ with SAE bosses, I think it would be 87-90)
    -Ram (I forget the specs, I will measure)
    -P Style Pump (Bought from Rock Auto, still in box, never installed)
    -Hoses (including a spare)
    -Cooler (Tube and fin style)

    I also have a heavy duty tie rod and drag link that can be included or sold separately.

    I will get some pics and specs soon. If you are interested PM or Email me.

    I can't find a great picture right now... but a lot of you have seen it!
    Last edited by OWEN; 11-25-2010, 01:14 AM.
    1950 Willys Trail Rig
    2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4
    Tags: None
  • #2
    Bump
    1950 Willys Trail Rig
    2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4

    Comment

    • #3
      How much are you looking for it? Will it work with a D30?
      -Caleb

      Crawl Daddy Champion 2011

      1999 XJ 4 inchs of lift or so, 35s and some other stuff.

      Comment

      • #4
        Probably, you have to weld on brackets for the ram,they need to be fairly stout,

        The pump is probably different in a cherokee, at least in a newer one. Not sure if the box will bolt on or now

        I am thinking $400 for the pump, box, ram, hoses, cooler etc

        Probably $150 OBO for the tie rods.

        $500 for all

        Definately willing to take some offers, I haven't really looked to see what the new kits are going for
        1950 Willys Trail Rig
        2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4

        Comment

        • #5
          Bump.

          Everything is removed and ready to sell.

          The Ram is a 1.5" Bore X 8" Stroke (I will double check the stroke but I know it is 1.5" bore) It has spherical rod ends at both ends.

          The box is for a early YJ, it uses 7/16" coarse thread fasteners

          Cooler is a tube and fin style.

          Steering linkages are from my 63" wide Dana 60 with 1 ton Chevy TRE's, they could be shortened, I will include weld in bungs to do so.

          Again $400 for everything except steering linkages
          $150 for steering linkages, which include Chevy 1 ton TREs and 1.5"x.25" tube
          $500 for everything!
          1950 Willys Trail Rig
          2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4

          Comment

          • #6
            Hey im interested.

            Comment

            • #7
              Confirmed 8" stroke

              pics

              1950 Willys Trail Rig
              2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4

              Comment

              • #8
                Could I get a picture of the opposite side of the steering box where all the mounting holes are...

                And a measurement from bolt to bolt on the tie rod and drag link?

                Comment

                • #9
                  Originally posted by Mike View Post
                  Could I get a picture of the opposite side of the steering box where all the mounting holes are...

                  And a measurement from bolt to bolt on the tie rod and drag link?
                  Sure, I'll try to get tthose this week
                  1950 Willys Trail Rig
                  2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4

                  Comment

                  Previous template Next
                  Working...
                  X