fuck logan steel

[Even]

Don't bother with Logan unless you are looking through the discount scrap bin.

Called up Logan Steel today to check on prices for 1/4" sheet, and they wanted over $375 + tax for a sheet of 4' x 8'

Called Chapin and Bangs in Bridgeport, got a 4'x8' sheet of 1/4" for $183 including tax.

That is all.

[Lycaon]

yeah, and they never seem to have 1.5" .25wall tubing in stock

[Even]

Is 5.70 per sq foot even a good price?

Chapin was the only other place I called, and after Logan that sounded real reasonable.

[Ktmracer419]

Don't bother with Logan unless you are looking through the discount scrap bin.

Called up Logan Steel today to check on prices for 1/4" sheet, and they wanted over $375 + tax for a sheet of 4' x 8'

Called Chapin and Bangs in Bridgeport, got a 4'x8' sheet of 1/4" for $183 including tax.

That is all.

what the fuck are you doing with 4x8' of 1/4" plate?

making bulletproof xj doors or something?

[Even]

what the fuck are you doing with 4x8' of 1/4" plate?

making bulletproof xj doors or something?

As soon as I got home I cut it into 2x4 pieces.

I finally got set up with sheilding gas today so I'm just going to be doing general fab jobs. Right now I need tow points on the ZJ, maybe a front bumper in the future. Probably a rear bumper for the XJ, etc.

Usually it's cheaper to buy in bulk, and I know I will use it all eventually, so why the fuck not.

It weighed 330 lbs

[xjeeper]

i called to get prices for my steering and they told me $9/ft plus $20 to cut it. I went to get it and i ended up leaving there with 10 ft of DOM cut to size for $40. I really have no complaints about them

[Daven]

Where is Logan Steel anyway?

[Even]

meriden

[Even]

Where is Logan Steel anyway?

p.s.

who are you, and where the fawk is your newbie intro

[ninetysix-ex-jay]

Down Even Down


AUShii......post up here bro>>> http://sisoffroad.com/forums/forumdisplay.php?f=3

[Even]

way to ruin my fun maru

[ninetysix-ex-jay]

way to ruin my fun maru

Oh me so sorry (Asian face)

[netrachamp1853]

I live a couple miles away, I think they have a pretty good selection in the bargain barn im always digging around in there.

[Grandzjtsi]

I usually carry a battery operated saws-all when I go to get lengths of tube and metal just buy the biggest length possible then chop in the parking in lot

[Even]

$9/ft plus $20 to cut it

i ended up leaving there with 10 ft of DOM cut to size for $40

somebody fucked up with the calculator at the front desk

but right there is my point, 10ft for $40 isn't terrible from the prices I've seen, but them telling you $9 a foot is bullshit imo