someone thats good at pulling tcases

[hoggie101]

Need someone who is awesome at pulling and installkng transfer cases because last time I tryed it was very good for this saterday

[Bummer]

I hear dizzy is good at leaving t cases behind

[tjramplebump]

i got you mang

[Zullock Holmes]

have fun, i even gave you the right tools!!!!!

1/4 drive 9/16's socket and my special grinded open end

[Hydra]

I hear dizzy is good at leaving t cases behind

SICK KNOWLEDGE BRO!

[ninetysix-ex-jay]

have fun, i even gave you the right tools!!!!!

1/4 drive 9/16's socket and my special grinded open end

Might need to borrow that opened end when I get home. Or I'll just pay you to do it

[Zullock Holmes]

i'll let you borrow it. you can't pay me enough to lay under an xj and fight that fight anymore. The atlas takes about 4 minutes to unbolt.

[ninetysix-ex-jay]

i'll let you borrow it. you can't pay me enough to lay under an xj and fight that fight anymore. The atlas takes about 4 minutes to unbolt.

Yeah I hear ya man, this is why the only thing I put on my XJ was that LED bar and my parts pile is growing

[customcreationsllc]

What are you guys talking about hard?
I've never once had an issue unbolting an XJ T-case.
Are you talking about the upper bolt?
Don't be a pussy, put a little elbow grease on it.
Why are you pulling the T-case anyways?


I guess when you are used to working on Audi and crap all the time which you can't even touch the bolt and it is usually a Allen or a triple square. Or try a Lexus you need a breaker bar on every bolt.

XJs have a ton of room to work.

[Zullock Holmes]

having the right tools was all the battle, the first time i did it it was a nightmare because i couldn't get anything i had to fit and i butchered one of the nuts trying to use an open end.
I literally spent an hour and a half on 6 nuts......

Everytime after that i had very little issue with the job.

Matt's jeep though, he done but stripped every last one of em and that tcase has never been out so they're all still tight as balls. No fun. I quit.

[hoggie101]

Going to put one with an sye in it already and put my sye in so I have a spare transfer case

[hoggie101]

having the right tools was all the battle, the first time i did it it was a nightmare because i couldn't get anything i had to fit and i butchered one of the nuts trying to use an open end.
I literally spent an hour and a half on 6 nuts......

Everytime after that i had very little issue with the job.

Matt's jeep though, he done but stripped every last one of em and that tcase has never been out so they're all still tight as balls. No fun. I quit.

I had all but one out

[ninetysix-ex-jay]

I literally spent an hour and a half on 6 nuts......

Yeah you did

[HeavyMetal]

Yeah you did

[justtorchit]

What are you guys talking about hard?
I've never once had an issue unbolting an XJ T-case.
Are you talking about the upper bolt?
Don't be a pussy, put a little elbow grease on it.
Why are you pulling the T-case anyways?


I guess when you are used to working on Audi and crap all the time which you can't even touch the bolt and it is usually a Allen or a triple square. Or try a Lexus you need a breaker bar on every bolt.

XJs have a ton of room to work.

hahaha, i was gonna type the same thing, but decided to be nice today.

DONT BE A PUSSY!!! shit takes like a half hour tops.