where to buy reamer for 1 ton steering

[netrachamp1853]

Can somone please direct me to where I can buy the reamer? Thanks folks

[HeavyMetal]

this is where i got mine a couple years ago

price point is super hard to beat

http://www.acetoolonline.com/product-p/irw-11221.htm

plus theyre in long island, so its fast shipping i imagine

[cherokee-at-16]

so 1/2 to 1 is the right reamer? Is that the same as 1.5" per 1 foot? I looked up the 1.5 per foot ones and they were all $80+, what gives?

http://www.xkut-reamers.com/servlet/...ER-FOOT/Detail

[HeavyMetal]

1/2" to 1" is correct yes, thats all i can say

[cherokee-at-16]

As long as it has worked and will work I wont argue.

[clean4drxj]

1ton reamer craze lately

[armadasx]

http://www.tools-plus.com/irwin-11214.html - same one will posted just a bit cheaper.

[customcreationsllc]

so 1/2 to 1 is the right reamer? Is that the same as 1.5" per 1 foot? I looked up the 1.5 per foot ones and they were all $80+, what gives?

http://www.xkut-reamers.com/servlet/...ER-FOOT/Detail

X2 That's the one I have.

Buy quality tools.
I've tried Irwin taps before the biggest pile of crap I dont' know maybe the reamer is better but my guess is not.

You can also search race car catalogs like chassis shop and left hander etc.


And most important buy the slowest drill you can get I got a 1/2 IR drill 400rpms.
I tried air ratchet but the head was pretty dam hot by the time I was finished.

[HeavyMetal]

I've tried Irwin taps before the biggest pile of crap I dont' know maybe the reamer is better but my guess is not.

It reams, what can I say? It isnt much of a repeat use tool unless youre whoring it out to a crowd or making kits

a reamer is one of the few tools i think it is logical to buy a "crap" thing of considering how expensive they are normally


orrrrrr go out and buy a reamer that costs as much as your steering youre reaming, whichever

[cherokee-at-16]

I ordered the irwin one because the xkut one is out of stock. Turns out the irwin one Wasn't in stock either and would be a week until they are.

http://www.tools-plus.com/irwin-11214.html - same one will posted just a bit cheaper.

And this isn't the same reamer.

[customcreationsllc]

I just never had luck with irwin drills or taps maybe the reamer is better.
I've probably used the X-kut reamer over 50 times and it still sharp. But that is the only one I have used so don't know any better.


FYI, There is a tools plus in waterbury.