Tweet
want to change the look of my tyas some. let me know if you have one.
Thanks. Dan
Thanks. Dan
-
Dan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.com -
Ive heard of people using wood routers with good success...
95 xj JY 3" 35" truxus mt's -
huh, that may work, but dont have one of those either
Dan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.comComment
-
dremel works, or a cut off wheel with a VERY steady handOriginally posted by HitItWithSomeSpeedOriginally posted by Lawn GuylandOriginally posted by Zullius CaesarComment
-
stedy hand key to very many sucessful operationsOriginally posted by hippie metal View Post
Comment
-
Originally posted by kappy View PostA steAdy hand IS key to very many sucCessful operations
Not as much as sipping tires with a cutting wheel. To deep and BSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS SSSSssssssssssssssssssssssssssssssssssssssssssssss sssssssssssssssssssssssssssssssssssssssssssssssss......FUCK!!!!Originally posted by HitItWithSomeSpeedOriginally posted by Lawn GuylandOriginally posted by Zullius CaesarComment
-
Im not siping, actually want to cut tread blocks in half, router sounds like a good idea.
ok, anyone have a router I can borrow
Dan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.comComment
-
Where are you located?Bent Fab Evo4 Rockwell Buggy
2011 Silverado 6.2L LT
2009 Pontiac G8 GT
2004 Z1000
1999 TJComment
-
meridenDan.
2000 XJ, BJ 60 front, welded, 5.13's, 3 link, ruffstuff heims. D70 rear, detroit, 5.13's, discs. stretched. trail ready beadlocks. 39" Red labels. 4:1 Klune V-drive/D20, PSC full hydro
http://www.facebook.com/people/Dan-M...00000913365979
www.DMROFFROAD.comComment
-
one extreme4x4 they used a sharpened sawsall.
there is a dealer on Rausch Creek that offers tire grooving.
Or buy one, then you can rent it out.
I don't have a use for one yet, but they aren't crazy money.RCrocs #123 Brown CJ-5
www.offroadcustomcreations.com
Sponsors:
Corbeau, Tom Wood, PSC, Polyperformance, Inner Air Lock, Miller Welds, Heavymetal ConceptsComment
-
They are like 120 bucks on ebay with 4 different size blades..buy one so i can borrow it haha.98 Cherokee, D30/8.25 w/4.56s locked F/R -- 3 link front IRO springs rear with shackle relocation, one ton steering w/heims, hybrid cage under contruction, 33'' KM2'sComment
-
I "have" this one http://www.daymotorsports.com/product/403/TIRE-GROOVER
It works well, do yourself a favor an order some extra blades with it because you will go through them, and when you order new ones the shipping is usually more than the blades.
It has spent more time being lent out, than in my possesion. Right now one of my friends has it. I wish I charged to lend it, it would be paid for and then some...1950 Willys Trail Rig
2007.5 Dodge 2500 QCSB 6.7 Cummins 68RFE 4x4Comment
Comment